Table of Contents
Advertisement
3.2.4. Verification with Password
Description
While in standby mode, key in the user ID number
(e.g., A01).
Instead of lifting the shutter and placing the finger
on the sensor, press the Func key.
Enter the personal password (e.g., 123456)
Press Func key again to confirm. If the personal
password is correct, the person is authenticated and
the message will appear.
3.3. OTHER FUNCTIONS
3.3.1. Suspending Resuming User
You can temporary suspend a user ID. This is useful if you want to temporary stop
a user from getting into your business premises, and you may want to resume his
access right later on. This is done via the function "Inactive ID" in the function
menu, and it is illustrated in the following steps: -
Description
While in Standby Mode, press the Func key to enter
the Setup Menu. Enter the Administrator Password
(default 123) and press Func key, then press 2 to
select "Inactive ID" menu.
Enter the ID # you want to suspend (e.g., A01).
Press the Func key to confirm. The ID # is
suspended, and the user can no longer be
authenticated. The system will return to the standby
mode.
Copyright © 2002 Lucky Technology Limited
iGuard FPS110 Series Operation Manual
Version 3.4.xxxx (Aug 10
LCD Display
Mon Aug 30 13:49
A01_ IN
Your Password: _
Your Password:
123456_
A01 Authorized_
LCD Display
Enter ID:
Enter ID: A01
ID A01:
Inactivated !
www.lucky-tech.com
th
, 2004)
24
Advertisement
Table of Contents
