Related Manuals for Shurhold DUAL ACTION POLISHER
Summary of Contents for Shurhold DUAL ACTION POLISHER
- Page 1 DUAL ACTION POLISHER USER’S GUIDE Safety NoteS • featureS • INStruCtIoNS • MaINteNaNCe & Care • WarraNty...
- Page 2 Wear ear protectors. Random Orbital Action Prevents Swirl Marks Pad oscillates and rotates on 2500-6500 OPM Motor varying orbits Orbits at Ideal Speed Foam pads sold separately. Extra Long 20 Foot Cord Allows Additional Convenience dual action Polisher User’s Guide www.shurhold.com...
- Page 3 6: 6500 OPm removing Paint defects & swirls Changing the baCk-UP Pad To reduce the risk of injury, turn unit off and disconnect it from the power source before installing and removing accessories, before adjusting or making repairs. An Using the POlisher accidental start-up can cause injury. If your workspace is so light that it can be moved by the rotating pad, anchor it se- a. Engage the flats of the spindle with the supplied spindle wrench. curely to prevent possible bodily injury. a. Read and follow the directions supplied with the product (polishes, waxes, clean- b. While holding the spindle with the wrench, use your other hand to rotate the pad ers, etc.) counterclockwise to remove. c. To install the pad, reverse the above procedure. b. Apply a small amount of the product directly to the polishing pad. c. Grasp the polisher firmly with both hands - one hand on auxiliary handle and one on the motor housing. d. Position the polisher with the polishing pad against the work surface and Start the polisher. NEVER run or stop the tool when it is not in contact with the work surface. e. Move the polisher back and forth in a sweeping motion, over-lapping each previ- ous pass. dual action Polisher User’s Guide www.shurhold.com...
- Page 4 Be sure to use a separate pad for each compound. Avoid using different compounds on the same pad. A plastic baggie is a good storage source for pads to be used again. Be sure to work in an environment with good lighting, such as fluorescent or halogen. Direct sunlight should be avoided. Always remove jewelry and other clothing or objects which may scratch the surface as you polish. For best results, use Shurhold’s YachtBrite Pro Polish and follow these steps: STEP 1 Choose the right YachtBrite pad for the job. Apply the pad to the center of the Quick Change Pad Holder. STEP 2 Apply Pro Polish to the appropri- ate pad. STEP 3 Apply Pro Polish evenly on the surface to be polished. Dabbing over the entire surface is ideal, too much compound in one area will cause it to fling off the pad. dual action Polisher User’s Guide www.shurhold.com...
- Page 5 & BUFFING wITH POLISHER The benefits of applying wax by machine include speed, even coverage, less waste, ease of application, ease of removal and brighter shine. Using the pattern described on the opposite page, apply wax at a speed of 1 or 2 in a thin layer for an easily buffed surface and high-gloss shine. You may use a dry foam pad at a speed of 1 or 2 or a dry microfiber towel to remove the excess wax. STEP 6 Once you’ve polished enough that only a thin layer of polish remains, you may stop. Check to see you’ve covered all the areas necessary. The remainder of the polish can be removed with a microfiber towel. dual action Polisher User’s Guide www.shurhold.com...
- Page 6 White available in 4 lb. (1.8kg), 10 lb. (4.5kg),48 lb. (21.8kg) and 480 lb. (218kg) sizes. QUICk DETAIL serious shine One step Cleaner, Polish & Protectant ® Serious Shine cleans, polishes and protects virtually any solid surface in one easy step, leaving no greasy, artificial residue. Also, contains UV inhibitors and anti-static properties, further protecting all types of sur- faces. Serious Shine is the perfect quick detailer. For best results use with Shurhold Microfiber Towels. Available in 3.5 oz. (100 g) and 14 oz. (396 g) sizes. dual action Polisher User’s Guide www.shurhold.com...
-
Page 7: Specifications
& buffing 2: 3200 OPm waxing & buffing 3: 3900 OPm Polishing & Cleaning 4: 4600 OPm Polishing & Cleaning 5: 5500 OPm removing Paint defects & swirls 6: 6500 OPm removing Paint defects & swirls 3119 S.W. 42nd Avenue, Palm City, Florida 34990-5558 Tel: 772-287-1313 Toll Free: 800-962-6241 Fax: 772-286-9620 email: info@shurhold.com website: www.shurhold.com ©2009, Shurhold Industries, Inc. All rights reserved.
Need help?
Do you have a question about the DUAL ACTION POLISHER and is the answer not in the manual?
Questions and answers