Pedal Assist; Throttle; Gears - FiField Electric Bicycle Owner's Manual

Battery Indicator
The five battery bars represent
the capacity of the battery. When
the battery is low the battery
frame on screen will flash to notify
that it needs to be recharged
immediately.
Error Code Information
If an error code appears, take
note of what code is displayed.
Contact a service center to get
your bicycle repaired. An error
code will be displayed in the
bottom right corner in place of the
normal "WATT" display.
For more information on the LCD
screen, refer to our website to
download the extended version of
the manual.
Pedal assistance
Your pedal assist will start
once you start to pedal and stop
once you stop peddling. You are
able to adjust the amount of
assistance on the LCD screen by
adjusting the + / - button. If you do
not want any assist, you may set it
to 0 and no assist will be given. If
the handbrakes are applied, the
pedal assist will cut automatically.
You do not need to turn the power
off when going downhill.

Throttle

The throttle is located on the
left side of your handlebars. It is a
one speed throttle which does not
engage unless there is movement
in the rear wheel. To engage the
throttle, turn the throttle towards
you while seated on the bike.
There is an automatic SHUT OFF of
the throttle on the brake levers.
Every time the brake lever is
pressed, the power from the
motor is disconnected.

Gears

There are 7 external gears on
your bicycle. The gears are located
on the right side of your
handlebars. In order to shift
between gears, simply move the
shifter up and down until you find
a suitable gear to ride in.
Battery
The battery supplied is the top
quality Lithium Battery and was
designed specifically for this
electric bicycle. The battery is
sealed safely within the frame of
the bike to ensure no damage can
come to it.
Your battery should be
recharged after each use. The
normal lifecycle of the battery, if
continuously discharged and
11