Advertisement
OPERATING INSTRUCTIONS
1. Perform pre-start maintenance inspection on all applicable systems
prior to operating the machine. This is essential for the safe, effective
and efficient operation. You will get optimum performance from your
system ONLY if these instructions and inspections are followed. Any
indication that the pressure washing system was not operated and
maintained according to these instructions may cancel the
manufacturers' warranty.
Location – Gasoline powered machines must be outdoors in a well
ventilated area.
Controls – All controls turned to the off position.
Pump oil level – Level the pressure washer. Be sure oil level is
correct on dip stick. If the level is low, add CORRECT oil to the
proper level. Refer to the Glossary or the suggested spare list for
proper oil to use. DO NOT OVER FILL.
Gas Engine - Gasoline levels – The engine is a 4 cycle and uses
regular octane, unleaded fuel. DO NOT USE MIXED FUEL.
Refer to the engine operation manual included with your
pressure-washing unit.
Gas Engine - Oil levels – The engine is a 4 cycle and uses 10W30
Detergent oil. Refer to Glossary or engine manual.
Oil Fired Burner- Oil Tank Levels – #2 Fuel is recommended fuel
for Oil Fired Hot Water Pressure Washers. It burns cleaner and
the burner requires less maintenance. Diesel fuel may be used as
an alternative. Do not overfill burner tank.
10
Advertisement
