Related Manuals for Easy-Kleen EZO3504G-K-PSR
Summary of Contents for Easy-Kleen EZO3504G-K-PSR
- Page 1 Owner's Manual Portable Pickup Truck Skid 1-800-315-5533 • service@easykleen.com • www.easykleen.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION The safe operation of our pressure washing systems is the FIRST priority of Easy-Kleen. This will only be achieved by following the operation and maintenance instructions as explained in this manual and all other enclosed manuals. This manual contains essential information regarding the safety hazards, operations, and maintenance associated with this machine. - Page 3 WARNING: Risk of fire. Do not add fuel when operating machine. 3. The minimum clearance to any combustible material is 12 inches. WARNING: Keep water spray away from electrical wiring. 4. All electrically powered equipment must be grounded at all times to prevent fatal electric shots.
- Page 4 WARNING: Trigger gun kicks back. Hold with both hands. 7. Hold firmly to the gun and wand during start up and operation of the machine. Do not attempt to make adjustments while the trigger gun is in operation. 8. Make sure all quick coupler fittings are properly secured before operating pressure washer.
- Page 5 14. Never run pump dry of water or oil or let the pump run with the trigger gun released for more than 2 minutes. 15. Do not attempt to operate this machine if fatigued or under the influence of alcohol, prescription medications, or drugs.
-
Page 6: Model Specifications
Portable Pickup Truck Skid The Easy Kleen Portable Pickup Skid Unit is designed to fit into a 6’6” box of a pickup truck. Model Specifications: MODEL HP/ Engine Fuel DRIVE ELECTRIC START BURNER EZO3504G-K-PSR 3500 400,000 14 KOHLER Gasoline GEARBOX EZO3504D-K-PSR 3500 400,000 9.8 KOHLER... -
Page 7: Component Identification
5. Start pump and engage trigger on the pressure gun. Operate the system until fluid coming out from the nozzle runs the same color as antifreeze fluid. Release trigger with pump still running, and wait 10 seconds to allow antifreeze to pass through bypass hose before shutting off pump. Your machine is now prepared for storage. -
Page 8: Manufacturer's Warranty
Easy-Kleen does not authorize any other party, to make any representation or promise on behalf of Easy-Kleen or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility to ensure that the installation and use of Easy-Kleen products conform to local codes. -
Page 9: Warranty Repairs
Manufacturer does not cover wet end of Pump Seals, Valves, and Plungers. WARRANTY REPAIRS Warranty claims must first contact Easy-Kleen’s Service Department to be issued a preauthorized repair number (PARN). You will need a copy of your invoice and the equipment serial number.
Need help?
Do you have a question about the EZO3504G-K-PSR and is the answer not in the manual?
Questions and answers