Performing A List - Voice Systems RD-80e Operating Manual

DISK PROTECTED
The disk on which you have attempted to save the List has write protection.
Move the tab in the corner of the disk to the closed position, insert it in the drive again and
press [ESC].
DISK FULL
There is not enough space available on the disk to save the List file just created.

10.3 PERFORMING A LIST

To select a List, press the [LIST] button from the Main Page and display the number of the
List file required using the [INC] and [DEC] keys. Then press [ENTER] to confirm the
selection.
When the [PLAY] key is pressed the first song in the List will be played, and when it
finishes the second song will automatically be loaded and played, down to the last step.
If [STOP] is pressed, the current song will be interrupted and the List reloaded from the
first step.
To return to the Song mode, press the key of the same name on the panel and confirm
with [ENTER].
NOTES
ü If one or more songs in the List are deleted, during performance of the List a number
of steps might be skipped where the missing files are placed. It is therefore important
to bear this in mind when deleting files.
ü Never extract the floppy disk during performance of the List.
RD-80e
DATA FILER
96