Voice Systems RD-80e Operating Manual page 37

and insert the destination disk:
The data will then be written on the destination floppy disk immediately:
When the procedure is completed, the display prompts you to extract the destination disk
and insert the origin disk if you wish to copy another file.
After insertion of the origin floppy disk, the display will show:
confirming that the copy has been completed successfully.
The video page for selection of the file will then appear again to allow you to make another
copy if you wish.
During the reading and/or writing operations, pressing the [ESC] key interrupts copying of
the file. The display will show the message:
for the time taken to close any open files. Insert a valid floppy to quit the abort function.
CAUTION!
You are urged to take special care when extracting and inserting the disk; this must
only be carried out when the instrument gives the relative prompt. This is because it
takes a short time for the drive heads to reach the safety position.
If the destination floppy disk is inserted before the system gives the prompt, extract the
disk again and wait for the message.
RD-80e
DATA FILER
85