Table of Contents
Advertisement
SECTION 3
OPERATING THE ASTROJET 5000
When the Clean the Print Cartridge button is pressed the "Clean
the Print Cartridge(s)" window appears and prints the page
below.
Clicking on the Intermediate Clean button will present the
screen on the right. Clicking on the Prime button will take you
to the next level of cleaning if necessary. When the cartridges
are clean click on the Done button to exit this routine.
The Display Ink Level button will show you an
approximation of the amount of ink remaining in the
cartridges. This only works if you start with a new
cartridge and do not remove it during its use. Click
OK to exit this function.
The Calibrate the Device button is used to calibrate
the relationship between the black and color
cartridges to make
sure they line up
with each other.
This function is
usually performed
whenever a new ink
cartridge is installed
in the printer. Click
on Done when the
alignment is
completed or on
Align to repeat this
function. A copy of
the print that the calibration routine prints is shown here.
20
Advertisement
Table of Contents
