Getting Connected - iConnectivity iConnectMIDI Quick Start Manual

Getting Connected

1. Select the appropriate plug adaptor for your region and attach it to the
power supply at the wall wart end. It should snap into place.
2. Plug the power supply barrel connector into the barrel jack at the rear
panel of iConnectMIDI™.
3. Plug the power supply into the power receptacle. iConnectMIDI™ will
power up by displaying a brief flash of some of the indicator lights,
followed by a constant green light of the power indicator light.
4. You are now ready to connect devices to iConnectMIDI™.
TM
iConnectMIDI
Quick Start Guide
5 of 21