Note:
1.
Do not turn off the router or press the Reset button while the firmware is being upgraded.
2.
The router
will
4.12.3 Factory Defaults
This page (shown in Figure 4-57) allows you to restore the factory default settings for the router.
Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.1.1
•
The default Subnet Mask: 255.255.255.0
Note: Any settings you have saved will be lost when the default settings are restored.
4.12.4 Backup and Restore
This page (shown in Figure 4-58) allows you to save current configuration of router as backup or
restore the configuration file you saved before.
Click the Backup button to save all configuration settings as a backup file in your local
computer.
To restore the router's configuration, follow these instructions:
•
Click the Browse button to select the backup file which you want to restore.
•
Click the Restore button.
NS-WIR54GF
reboot after the Upgrading has been finished.
Figure 4-57 Restore Factory Default
Figure 4-58 Backup & Restore Configuration
- 64 -
54M Wireless Router User Guide