Table of Contents
Advertisement
Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable
Domain Filtering have been selected on the Firewall page. To Add a Domain filtering entry, click
the Add New... button. The page "Add or Modify a Domain Filtering entry" will appear, shown
in Figure 4-38:
To add or modify a Domain Filtering entry, follow these instructions:
1.
Effective Time - Enter a range of time in HHMM format specifying the time for the entry to
take effect. For example, if you enter: 0803 - 1705, than the entry will take effect from 08:03
to 17:05.
2.
Domain Name - Type the domain or key word as desired in the field. A blank in the domain
field means all websites on the Internet. For example: www.xxyy.com.cn, .net.
3.
Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4.
Click the Save button to save this entry.
To modify or delete an existing entry:
1.
Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2.
Modify the information.
3.
Click the Save button.
NS-WIR54GF
Figure 4-37 Domain Filtering
Figure 4-38 Add or Modify a Domain Filtering entry
- 49 -
54M Wireless Router User Guide
Advertisement
Table of Contents
