Table of Contents
Advertisement
SSID - Enter a value of up to 32 characters. The same SSID must be assigned to all
wireless devices on your network. The default SSID is NISUTA_XXXXXX(XXXXXX
indicates the last unique six characters of each device's MAC address). This value is
case-sensitive. For example, NISUTA is NOT the same as nisuta. It is recommended
strongly that you change your networks name (SSID) to a different value.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of the
router in a region other than one of those specified in this field.
Channel - The current channel in use. This field determines which operating frequency will
be used.
Mode - Indicates the current mode 54Mbps (802.11g), 11Mbps (802.11b). If you select
54Mbps (802.11g), it is compatible with 11Mbps (802.11b).
These settings are only for basic wireless parameters, for advanced settings, please refer to
Section 4.5: "Wireless."
Note:
The change of wireless settings won't take effect until the router reboots! You can reboot it
manually. If you need instructions as to how to do this, please refer to
Click the Next button. You will then see the Finish page:
After finishing all configurations of basic network parameters, please click Finish button to exit
this Quick Setup.
NS-WIR54GF
Figure 3-10 Quick Setup - Finish
- 12 -
54M Wireless Router User Guide
Section 4.12.5: "Reboot".
Advertisement
Table of Contents
