1. Manuals
  2. Brands
  3. Hunt Manuals
  4. DVR
  5. HBR-09EE
  6. User manual

Hunt HBR-09EE User Manual

09 channels hybrid digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

USER MANUAL

09 CHANNELS
HYBRID DIGITAL VIDEO
RECORDER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HBR-09EE and is the answer not in the manual?

Questions and answers

Related Manuals for Hunt HBR-09EE

Summary of Contents for Hunt HBR-09EE

  • Page 1: User Manual

    USER MANUAL 09 CHANNELS HYBRID DIGITAL VIDEO RECORDER...
  • Page 2 INSTRUCTION MANUAL To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and completely. FCC Compliance USER-INSTALLER CAUTION: YOUR AUTHORITY TO OPERATE THIS FCC VERIFIED EQUIPMENT COULD BE VOIDED IF YOU MAKE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE TO PART 15 OF THE FCC RULES.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION........................4 FEATURE........................4 SPECIFICATION......................4 HARDWARE OVERVIEW...................... 8 FRONT PANEL ......................8 CAMERA & MONITOR LOOPING.................10 ALARM TRIGGER.....................10 IR REMOTE CONTROL ...................12 PTZ (PAN, TILT AND ZOOM) CAMERA ...............13 SYSTEM SETUP ........................14 MENU SETUP INTERFACE(GUI)................14 LIVE VIEWING AND POP-UP MENU..............16 CAMERA SETUP ......................20 RECORD SETUP ......................29 ALARM SETUP......................30...
  • Page 4  Up to four online clients for independent remote control; individual live-time, play-back & time-search function available  Support PPPoE/ Static/ DHCP IP & DDNS.  Powerful mobile surveillance function, support i-Phone & Android  SPECIFICATION MODEL HBR-09EE System Embedded Linux Ethernet RJ-45, 10/100/1000 Mbps x1 D-SUB output output connector...
  • Page 5 Through the log data to find the video event / time Backup Type Remote Client Software Hunt CMS, Iprosecu M.V2 for I phone / I pad , Iprosecu Monitoring Environment A.M.V2 for Android phone / Android pad, Web site IP / Analog cam Live View...
  • Page 6 BACKUP DEVICE (PAN DRIVE, HDD, BURNER) E-SATA RAID Networking Type Static/ DHCP/ PPPoE/DDNS Environment 0 - 45 ℃ / 32~113 F Operating Temp. Humidity 0~80% RH (non-condensing) Language English / Traditional Chinese / Simple Chinese / Russian / Type Italian / Japanese / Czech / France / Germany / Spanish / Portuguese Physical Color...

  • Page 7: Hardware Overview

    HARDWARE OVERVIEW 2.1 FRONT PANEL 11 12 Hybrid DVR OPERATION NO. LABEL OPERATION Led Indicator USB Connector/ USB Mouse Connector MIC IN Microphone input(Phone Jack) AUDIO OUT Earphone output(Phone Jack)
  • Page 8 BACK PANEL LABEL OPERATION E-SATA E-SATA interface AUDIO OUT Audio Output VIDEO OUT Connect to LCD monitor (VGA) POWER Connect to power adapter (AC 12V/5A) VIDEO OUT HDMI video output (HDMI) ETHERNET RJ-45 connector ALARM IN/ RELAY OUT/ 8 alarm in/ 1 relay out/ RS485 RS-485 AUDIO IN Audio input...

  • Page 9: Camera & Monitor Looping

    CAMERA & MONITOR LOOPING Here recommend link cameras by sequence to avoid unexpected image broken, from CH1, CH2, CH3, CH4……. ALARM TRIGGER There are three types of alarms: Motion detection, Video Loss Alarm, and External Alarm. Following are the possible action when alarm is triggered. Every action is configurable (Ex.
  • Page 10 D. Alarm in connecter RS-485: sends +/ receives + RS-485: sends -/ receives - Ground ALARM IN 1-8 Alarm input Relay: Normally close Relay: Normally open Relay: Common EX1：Connect GND & Alarm to external IR detector. EX2：Connect N.O & COM to external siren. Depending on the external device type, You may connect N.C &...

  • Page 11: Ir Remote Control

    IR REMOTE CONTROL ITEM Start recording on live view. ID1~8 ID (corresponding with DVR ID)** MENU Call out/ close main menu. 2X Zoom in/ back to original size on single channel ZOOM view. Call out/ close PTZ panel. AUTO Start/ end auto swap. IPCAM Call out/ close quick setup menu.

  • Page 12: Ptz (Pan, Tilt And Zoom) Camera

    2.5 PTZ (PAN, TILT AND ZOOM) CAMERA Following diagram for HYBRID DVR connect between PTZ camera & joystick controller, for HYBRID DVR to control PTZ camera please make sure the CAMERA ID, BANDRATE (default at 9600 bps) and RS-485 cable. 2 CORE Under “Two Core”...

  • Page 13: System Setup

    SYSTEM SETUP MENU SETUP INTERFACE(GUI) CAMERA SETUP RECORD SETUP ALARM SETUP NETWORK SETUP...
  • Page 14 AUTHORITY SETUP DISK MANAGEMENT SYSTEM SETUP EXIT...

  • Page 15: Live Viewing And Pop-Up Menu

    LIVE VIEWING AND POP-UP MENU Tick the box to fix the function panel on right side. Untick it, then the function panel will be hidden when the mouse moves away. GUI MENU BAR With live viewing mode, press this button to get into the GUI menu. DISK INFORMATION With live viewing mode, press this button to display disk information.
  • Page 16 zoom out position. Finally, click ENTER key to complete the setting. Moreover, click ZOOM Key again can disable digital zoom function. Using the panel key to perform zoom in function is fixed at 2 times.) PTZ CONTROLLER Within live-viewing mode, Clicks this button to get into the PTZ setup menu. User can right-click the button of the mouse to exit PTZ Setup.
  • Page 17 AUDIO VOLUME Press this button, and the audio volume control board will pop up. AUTO SWAP Press it to start auto swap. The interval depends on the setting in IPCam Image Setup when it’s on single channel view. For split screen the switch dwell interval is 5 sec DISPLAY CONTROL Within live-viewing or playback mode, use display control to switch the camera channel.
  • Page 18 Record mode: Manual – Stop Recording Record mode: Schedule – FULL REC period Record mode: Manual – Recording...

  • Page 19: Camera Setup

    CAMERA SETUP A. Camera Setup Hybrid DVR can connect two various cameras, analog camera or IP-Cam. Camera Type in Analog-CAM Camera Type in IP-CAM A-1. IPCam Quick Search...
  • Page 20 Press the “IPCam Quick Search” button and click “Search Device” button in the following, DVR will search the IPCAM devices which IP address are setup as the same domain as DVR IP address. Moreover, click the IPCam device which from the list can import the device information to the channel automatically without any manual key-in step.
  • Page 21 Key in the IP address, port, username, and password of the device you prepare to connect. You can find the information on the IP Cam. To link to the IP camera, check the RTSP Path settings of your IP camera, and key in the corresponding values of two streams in “RTSP Path 1”...
  • Page 22 1920 x 1080 1920 x 1080 Error Message: ”Invalid Substream Resolution! Please modify IPCam.” DVR takes 1920x1080 streaming for both single channel view and split screen. However, it can only allow 640x480 resolution for split screen, so it shows error in return.
  • Page 23 Camera Type in IP-CAM B-1. Resolution Click drop down list to change the resolution of connecting device. B-2. Quality Click drop down list to change the image quality. For this 9ch model, the total bits per second should not be over 36Mbps. B-3.
  • Page 24 C-3. Title Use the mouse to setup the title of connecting IP device. C-4. Contrast Press ◄ or ► to change contrast level. The adjustment value is between 0~255 C-5. Brightness Press ◄ or ► to change brightness level. The adjustment value is between 0~255 C-6.
  • Page 25 Camera Type in IP-CAM D-6. Relay Dwell Press ◄ or ► to change the relay time or disable relay function. D-7. Buzzer Dwell Press ◄ or ► to change the buzzer time or disable buzzer function. D-8. Area1 Sensitivity Press ◄ or ► to change the sensitivity of setup motion area in Area1. Click “Motion Area Setup”...
  • Page 26 Camera Type in IP-CAM E-1. Area1 Tick the “Area1” box and click “Area Setup” to drag a blue area for masking. E-2. Area2 Tick the “Area1” box and click “Area Setup” to drag a green area for masking. E-3. Area3 Tick the “Area1”...
  • Page 27 G-1 Key in information manually Here is the all-channel list. You can key in the IP address, port, and user name & password of the IP camera, and then assign the channel number. Tick “Enable” to connect with the IP camera. G-2 IPCAM Quick Search With Quick Search, you need not type the IP address.

  • Page 28: Record Setup

    RECORD SETUP A. Post-Alarm Record Time Press ◄ or ► to switch the recording time of post-alarm. That’s the recording length when alarm is triggered. B. Mobile Streaming Setup Press on to record the streaming for mobile viewing. C. Record Mode Use the drop down list to switch the recording mode.

  • Page 29: Alarm Setup

    ALARM SETUP A. Alarm Trigger Setup A-1. Alarm Auto Switch Use the drop down list to switch the alarm auto switch. When the alarm is triggered, the screen will switch to full screen, split screen (9CH split screen) or disable. A-2.
  • Page 30 This control item separates into two parts, “Buzzer Time” and “Relay Time”. User can press ◄ or ► to switch ext. alarm buzzer time and video loss buzzer time in “Buzzer Time” option. The adjustment value is from 5 to 99 seconds. Moreover, among “Relay Time”...

  • Page 31: Network Setup

    NETWORK SETUP A. IP ADDRESS SETUP Press ◄ or ► to setup HYBRID DVR IP address. A-1. IP Mode Press drop down list to change IP mode to STATIC IP or DHCP. A-2. IP Address Use the virtual keypad to setup the HYBRID DVR IP ADDRESS. A-3.
  • Page 32 B. PPPoE SETUP B-1. PPPoE Setting Press the drop down list to enable or disable PPPoE. B-2. User Name Insert the user name (ADSL account) which provided from local ISP. B-3. Password Insert the password which provided from local ISP. B-4.
  • Page 33 Idle: Stop service. DDNS registered successfully, now log by http://<username>.ddns.camddns.com: Registered successfully. Updating Failed, the name is already registered. Updating Failed, please check your internet connection. D. MAIL SETUP D-1. Enable Tick “Alarm” to send video to the mail address when external alarm is triggered. Tick “Motion”...
  • Page 34 E-1. Enable Use the checkbox to enable or disable FTP Server. E-2. FTP Server The IP address of FTP Server. E-3. User Name The username while log in to the ftp server. E-4. Password The password while log in to the ftp server. E-5.
  • Page 35 G-2. External HTTP Port Use the virtual keypad to insert the external http port. G-3. External RTSP Port Use the virtual keypad to insert the external rtsp port. H. Network Streaming Setup For Network Viewing, the Hybrid DVR provides two compression formats. H-1.

  • Page 36: Authority Setup

    AUTHORITY SETUP A. HDD Format Use the checkbox to enable or disable the authority of HDD Format function. If enable this function, the user has to insert password while performing HDD format. B. Anonymous User Login Use the checkbox to enable or disable the authority of anonymous user login. If enable this function, the user does not have to insert the username/ password and can view the live image via IE browser.
  • Page 37 E-2. Add User After click button, the setup page will present in the following. The user can distribute the authority and the permission for the new user.

  • Page 38: Disk Management

    DISK MANAGEMENT A. Overwrite Mode Click the drop down list to enable or disable overwrite function. B. Hard Disk Full Warning Click the drop down list to change value to 20/ 15/ 10 or 5% with non-overwrite mode. When LEFT RATIO is below the setting, it will enable AUDIBLE ALARM (If AUDIBLE ALARM of BUZZER of ALARM SETUP is ON).
  • Page 39 F. Format HDD Insert the user name and password while performing HDD format function.

  • Page 40: System Setup

    SYSTEM SETUP A. System Name Use the virtual keypad to insert the name of the HYBRID DVR. B. System ID Use ◄ or ► to setup the HYBRID DVR ID. The adjustment value is between 0~32 C. Language Use the drop down list to change the HYBRID DVR language. Currently, there are English, Traditional Chinese and Simplified Chinese three options.
  • Page 41 H. Time Setup Click button within “Time” block can adjust and synchronize the time of the HYBRID DVR as the system time of the PC. Moreover, if the user clicks the enable checkbox and button within the NTP Setup block, the time of the HYBRID DVR will synchronize as the NTP Server.
  • Page 42 K. Monitor Adjust User can use ◄ or ► to adjust the monitor related setting within this page, there are “Brightness”, “Contrast”, “Hue” and “Saturation” four options can be set. You can also adjust Resolution here by selecting “1280*720”, or “1920*1080(HDMI) / 1280*1024(VGA).”...
  • Page 43 3.EX DEBUG MESSAGE The purpose of the following procedure is to export a HDD debug message file. If user has problems with the DVR, the technical person can analysis the file and might find the cause of problem. Plug in a USB disk. ...
  • Page 44 When the downloading is complete, a message pops up to remind the user. Click”  OK”. Now the debug message file should have been in your USB disk. Please turn the file”  dbgms.tar” to HUNT’s technical person.

  • Page 45: Hybrid Dvr Playback

    4 HYBRID DVR PLAYBACK Note: Under playback mode, it will output sound when switch to full screen mode. RECORD BACKUP With playback mode, press this button to backup record (.ha0 video backup) and press this button again to finish backup. For performing the single image backup (.jpg single image backup), press first and then click this button to backup the necessary image.
  • Page 46 ZOOM Key again can disable digital zoom function. Using the panel key to perform zoom in function is fixed at 2 times.) RECORD AND PLAYBACK CONTROL Same as front panel controller and remote controller.

  • Page 47: Time Search

    TIME SEARCH Select the start of playback time and then click button to playback the recorded data. If the time contains the recorded data, the time point within this page will become red. EVENT SEARCH After entry to the event search page, user can click the event log item which shown on the list to start playback.

  • Page 48: Backup

    BACKUP After click the backup button, the user could use drop down list to select the storage device, USB/ DVD-RW and the backup time selection mode, Time Mode/ Hours Mode. After that, click button to start backup. TIME MODE Click ◄ or ► to select the start and end backup time. Moreover, among “Select Channel”...

  • Page 49: System Log

    SYSTEM LOG System log is reserved all of the system record. The maximum storage quantity is 2000. Click button to perform the further data filter action. After complete the specific item selection, please click button to reserve the setting. While return to the system log page, it will only reveal the specific selection items.

  • Page 50: Backup Playback

    BACKUP PLAYBACK SYSTEM REQUIREMENT CPU: Intel Celeron 1.6G MEMORY: 256MB. VGA: 32MB VGA RESOLUTION: 1024 x 768. OS: Windows XP / 2000 or above SUGGESTED REQUIREMENT CPU: Intel P4 2.8G MEMORY:512MB or above VGA:64MB or above VGA RESOLUTION:1024 x 768 OS: Windows XP / 2000 or above NETWORK BANDWIDTH: Upload Speed is 256kbps or above MAIN SCREEN SETTING...
  • Page 51 B. HDD PLAY 1. Remove the DVR HDD and connect it to the PC. The DVR HDD is Linux format, so the Windows system may not know it. Please use the software “Ext2Fsd” to assign a drive letter to the HDD. “Ext2Fsd” is in the attached CD or can be downloaded from the Internet.
  • Page 52 2. Under HDD play mode, select the DVR HDD to load the video file in the HDD. C. File Play 1. You can use D6Viewer to open a single video backup file. Under file play mode, select "Open". 2. Choose the path that the .haX file is reserved and pick the file to playback.

  • Page 53: Playback Operation

    3. Press the play icon to play the video or still picture. PLAYBACK OPERATION A. TIME SEARCH Select the Date and Time and then click to play the film. B. EVENT SEARCH It will display all the events which are reserved within the DVR HDD after press (Shown in the following) and double click left button of mouse to trigger event.
  • Page 54 C. LOG Click to check the log records. D. ZOOM Tick the “Zoom” box and drag an area on the screen. Click the area to zoom in.
  • Page 55 E. BACKUP FILE TO AVI 1. Please select specific channel to backup. 2. During video playback mode please press AVI bottom to start. 3. Make up a filename and path than press bottom to start AVI backup. 4. Press AVI bottom to finish backup.

  • Page 56: Network Viewing & Playback

    6 NETWORK VIEWING & PLAYBACK SYSTEM REQUIREMENT CPU: Intel Celeron 1.6G MEMORY: 256MB. VGA: 32MB VGA RESOLUTION: 1024 x 768. OS: Windows XP / 2000 SUGGESTED REQUIREMENT CPU: Intel P4 2.8G MEMORY:512MB or above VGA:64MB or above VGA RESOLUTION:1024 x 768 OS: Windows XP / 2000 NETWORK BANDWIDTH: Upload Speed is 256kbps or above 6.1 IP ADDRESS SETUP ON PC SITE...
  • Page 57 NOTE: Please input correct network parameters without blank spaces. On Device Lists, it lists all servers. Click on one server and then its IP setting will show on the right side. After editing the parameters and clicking on Submit, the following dialogue box will popup.

  • Page 58: Optional Microsoft Internet Explorer Setup

    6.2 OPTIONAL MICROSOFT INTERNET EXPLORER SETUP OPTION 1: DISABLE ACTIVEX WARNING A. IE  Tools  Internet Options  Security  Custom Level  Security Settings  Download unsigned ActiveX controls  Enable or Prompt (recommend). B. IE  Tools  Internet Options  Security  Custom Level  Security Settings  Initialize and script ActiveX controls not marked as safe ...
  • Page 59 OPTION 2: ADD TO TRUSTED SITES IE  Tools  Internet Options  Security  Trusted sites  Sites...

  • Page 60: Login

    6.3 LOGIN INSTALL ACTIVEX START INSTALL ACTIVEX ACCOUNT & PASSWORD LOGIN After IP setup and connect to network or LAN, type IP address on IE Browser directly. The following User name & Password Login window will popup. Default user name: admin Default password: admin...

  • Page 61: Remote Control

    6.4 REMOTE CONTROL LIVE VIEW Live Page Change Language Configuration Page Play Back Record System Time Video Backup Screen Format PTZ PANEL The 4-direction arrows are used to shift the camera view. The bigger value you select in "Speed", the longer the moving range becomes by each click on the arrow.
  • Page 62 RECORD Click to start record the current live video to the PC or storage device. The saved file is *.ha0 file. PLAYBACK Click and select time playback or event playback. Playback Time Time Search Event Search HDD Select A. HDD Select User can select HDD1 or HDD2 for playback B.
  • Page 63 BACKUP Click to select backup time point. The saved file is *.ha0 file. First, select Start and End backup time which have to among the Record Time. Then, click Save button to select the position on PC where the user is going to backup the data.

  • Page 64: Configure

    6.5 CONFIGURE A-1. System - Information DVR Name: This name will show on the IP Installer. MAC Address: The MAC address cannot be revised. Time Zone: The time zone can only be modified on local DVR. NTP Server: The NTP Server IP address can only be modified on local DVR. A-2.
  • Page 65 2. "Start" -> "Run" -> Key in: regsvr32(The path of KConfig.ocx) /u -> Click "OK" Ex.: regsvr32 C:\WINDOWS\system32\WATCH_16R\KConfig.ocx /u 3. "Start" -> "Run" -> Key in: regsvr32(The path of WATCH_16R.ocx) /u -> Click "OK" Ex.: regsvr32 C:\WINDOWS\system32\WATCH_16R\WATCH_16R.ocx /u 4. Log in the DVR/NVR via web browser again, and the browser will require you to install the new version of ActiveX control.
  • Page 66 A-4. System – Status Display Select the items that will be displayed on local DVR. A-5. System – System Setup DVR ID: The ID is used for distinguish DVRs when you use remote controller or RS485. Give different ID when you have several DVRs. Date Format: Select a format of date display.
  • Page 67 Click “Edit” to revise the device information. Click “Use” to add this device to channel. IP Camera, RTSP Mode: Under RTSP mode, Rtsp protocol is used to access camera. Give the IP address, port, username, password, and RTSP path of two streaming. B-2.
  • Page 68 B-3. Camera – Image Setup Analog Camera: Adjust image contrast, brightness, hue, saturation, and sharpness here. “Dwell Time” means the swap interval when performing swap on single channel screen. IP Caemra: Adjust image contrast, brightness, hue, saturation, and sharpness here. “Dwell Time” means the swap interval when performing swap on single channel screen.
  • Page 69 B-4. Camera – Motion Setup Analog Camera: Enable motion function, and drag on the screen the motion area. When motion is detected in the area, the DVR will be triggered and execute alarm action. Relay Dwell: The value determines the relay triggering time when motion detection happens.
  • Page 70 B-5. Camera – Mask Setup Analog Camera: Enable mask function, and drag on the screen the mask area. Decide the mask color. The area will be covered with selected color on live screen and playback video. IP Camera: Enable mask function, and drag on the screen the mask area. You can setup three mask area.
  • Page 71 C-1. Record – Record Setup Alarm Recording Time: When an event happens, the DVR can record the video at event timepoint, and send it to mail or FTP. Adjust the recording video length. Mobile Record: Enable it, and DVR will record the streaming for mobile viewing, so that you can view playback video on mobile phone.
  • Page 72 D-2. Alarm - Alarm Output Adjust the buzzer sounding time and relay triggering time when external alarm is triggered or video loss happens. D-3. Alarm – Alarm Event When the events happen, the event log will be recorded in the event list. Enable the event item that you want to record in the event list.
  • Page 73 E-2. Ethernet – PPPoE To use PPPoE, fill in the username and password of your ADSL account. The IP address will be displayed in “IP address” column after PPPoE is dialed successfully. If you enable the option “send mail after dialed”, DVR will send mail to your mail account after PPPoE is dialed successfully.
  • Page 74 Fill in the username that you want, and give the update time. After clicking “Apply”, check the state to see if you apply DDNS successfully. The DDNS address should be displayed in state column. E-4. Ethernet – Mail Tick “Alarm” to send video to mail when external alarm is triggered. Tick “Motion” to send video to mail when motion detection is triggered.
  • Page 75 F-1. Authority – Authority Setting HDD Format Password Check: Enable the option, then DVR will ask for password when users want to format HDD. Anonymous Login: Enable the option, then user can access the DVR via web browser and watch live screen without password. Disable the function, then password is necessary to access the DVR.
  • Page 76 Remove: Click “Remove” to remove the user. G-1. Disk – Disk Setup Overwrite Mode: Enable the function, and the data will be overwritten after the HDD is full. Hard Disk Full Warning: When the HDD space is smaller the setting, The buzzer will sound to remind users.

  • Page 77: Appendix A: Recording Time Lapse (Hours)

    APPENDIX A: RECORDING TIME LAPSE (HOURS) U N IT：H ours IM A G E Q U A LITY LO W (0. 25M ) M ED IU M (0. 5M ) STA N D A R D (1M ) H IG H (1. 5M ) (M bps) A V ER A G E A V ER A G E...

  • Page 78: Appendix B: Hdd Compatible Table

    APPENDIX B: HDD COMPATIBLE TABLE Brand Model Capacity others ST380815AS 80 GB 7200 10 ST3160815AS 160 GB 7200 10 STM3250820AS 250 GB 7200 10 ST3250310SV 250GB SV35.3 ST3400620AS 400 GB 7200 10 ST3500320SV 500GB SV35.3 ST3500410SV 500GB SV35.5 ST3500320AS 500GB 7200 11 ST3500418AS 500GB...
  • Page 79 WD5000AAKX 500GB SATA3 Caviar Blue WD5000AUDX 500GB SATA3 Green Power WD6400AAKS 640 GB 7200 BLUE WD6400AVVS 640 GB 7200 GP WD7500AACS 750GB 7200 GP WD7500AVVS 750GB 7200 GP WD10EACS 7200 GP WD10EADS Caviar Green WD10EVDS Green Power WD10EVVS 7200 GP WD10EARS Caviar Green WD10EALX...

  • Page 80: Appendix C: Error Message List

    APPENDIX C: ERROR MESSAGE LIST ERROR MESSAGE ERROR STATUS & REASON NOTE DISK ACCESS ERROR! H.D.D. Data structure Un-normal. Data does not record into HYBRID DVR or bad sector on HYBRID DVR H.D.D. Please install another H.D.D. and perform the record again. UPDATE FILE ERROR! Please re-download the update file and update again.

Table of Contents