USER MANUAL 4 CHANNELS DIGITAL VIDEO RECORDER INSTRUCTION MANUAL To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and completely.
INSTRUCTION MANUAL To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and completely. FCC Compliance USER-INSTALLER CAUTION: YOUR AUTHORITY TO OPERATE THIS FCC VERIFIED EQUIPMENT COULD BE VOIDED IF YOU MAKE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE TO PART 15 OF THE FCC RULES.
INTRODUCTION 1.1 FEATURE Easy operation; setting can be easily modified on screen. Multi-speed recording selection on normal or alarm recording mode up to 30/ 25 (NTSC/ PAL)) pictures per second. Multi-language. Support Manual/ Alarm/ Schedule recording mode. Built-In RS-485 port to control PTZ cameras or Joystick controllers for DVR. Support CDRW, DVDRW, USB, and Network Backup.
HARDWARE OVERVIEW 2.1 FRONT PANEL 11 12 13 14 15 16 17 20 18 DVR OPERATION ITEM DVR Function PTZ Function POWER Power status LED. Recording status LED. PLAY Playback status LED. H.D.D H.D.D. LED. Channel One Full Screen & Number: One. Channel Two Full Screen &...
▲ Move upward or increase the number. ▼ Move downward or decrease the number. Down ◄ Move leftward or decrease the number. Left ► Move rightward or increase the number. Right COPY USB Backup button. HDD, CD R/W, and DVD R/W. USB connector.
Relay Out Relay output. Power DC 12V /5A. 2.3 EXTERNAL ALARM There are three types of alarms that the system can be configured, such as Motion Detection Alarm, External Alarm, and Video Loss Alarm. Motion Detection Alarm and External Alarm: When Motion Detection or External Alarm was triggered, there are 5 possible actions will be taken.
Terminal Connectors: EXAMPLE 1:Connect Alarm In One with PIR (Passive Infrared). EXAMPLE 2:Connect with Alarm Siren at Relay N.O. 2.4 IR REMOTE CONTROL...
Page 9
ITEM AUTO Reserve. Reserve. Press REC to start recording and press twice to stop. Select channel 1-4 with full screen. Fast backward. Picture by picture backward. Picture by picture forward. Fast Forward. Play video forward. MODE Switch channel format. Move upward or increase the number. ▲...
2.6 PTZ (PAN, TILT AND ZOOM) CAMERA & JOYSTICK CONTROLLER The following diagram is for DVR connect PTZ camera with joystick controllers. Make sure CAMERA ID, BAUD RATE (default at 9600 bps) and RS-485 +/-. If the user wants to connect DVR with joystick controllers, please make sure each DVR ID Number is unique.
Page 12
PTZ SETUP & FRONT PLANE CONTROL EXAMPLE: A PTZ camera at channel 3 with PELCO-D, 9600bps. 1. Press the channel button 3 with full screen mode. 2. Press ►► and “PTZ” will appear at right upper corner. REC 2005/10/10 MON 12:00:00 50% 120P 3.
2.7 VGA OUTPUT VGA Output is optional. VGA output can connect with CRT or LCD monitor by D-SUB connector and the user can switch different resolutions and frequencies as follows. Resolution Frequency V G A 6 4 0 × 4 8 0 56Hz S V G A 8 0 0 ×...
3.2 LIVE VIEWING A. Quick playback search With live viewing mode, press ► PLAY to get into Quick Time Search and do playback or search by time or event. B. PTZ control a. Press the button of PTZ camera no. and the picture will be displayed with full screen mode.
3.3 SYSTEM SETUP SYSTEM SETUP ˙DATE FORMAT Y-M-D ˙DATE 2006/11/20 Press ▲ or ▼ to select items. ˙TIME 00:00:00 Press ◄ or ► to change values. ˙SYSTEM DATE & TIME ˙SYSTEM NTSC ˙KEYBOARD LOCK ˙ID NUMBER ˙LANGUAGE CH/ENG ˙PASSWORD PROTECTION DISABLE ˙EXIT A.
3.4 CAMER SETUP CAMERA SETUP ˙CAMERA CAM01 ˙DISPLAY Press ▲ or ▼ to select items. ˙BRIGHTNESS Press ◄ or ► to change values. ˙CONTRAST ˙HUE ˙COLOR ˙CAMERA TITLE ˙EXIT A. CAMERA Press ◄ or ► to switch channels. B. DISPLAY Press ◄...
3.6 RECORD SETUP RECORD SETUP ˙SCHEDULE RECORD ˙NORMAL RECORD PPS Press ▲ or ▼ to select items. ˙ALARM RECORD PPS Press ◄ or ► to change values. ˙ALARM RECORD DWELL 10 SEC ˙RECORD QUALITY HIGH ˙AUDIO RECORD ˙EXIT A. SCHEDULE RECORD Press ◄...
Page 19
A1.2 START-STOP 24 Hours can be set with ALL TIME or SEPERATED HOUR modes. ALL TIME Apply the same recording mode and PPS whole day. SEPERATED HOUR Like WEEKDAY & WEEKEND setting, the user can set 24 hours with 2 parts and set 2 different PPS.
[ATTENTION] WILL BE LOST ALL HDD-DATA ARE YOU SURE? ˙YES ˙NO 3.10 NETWORK SETUP NETWORK SETUP ˙TITLE HDR-04FE Press ▲ or ▼ to select items. ˙IP MODE MAUNAL ˙IP ADDR 192.168.001.220 Press ◄ or ► to change values. ˙SUB NET 255.255.255.000...
Page 23
A. TITLE Press ▲ or ▼ to select items and ◄ or ► to change characters. Here DVR TITLE is shown in IP Installer. B. IP MODE Press ▲ or ▼ to select items and ◄ or ► to change to STATIC IP or DHCP. C.
F. BACKUP FILE NAME Each backup file will be named as START TIME. EXAMPLE: 11201817.IN is Nov. 20 18:17 3.13 LOAD DEFAULT Press ENTER to load the system default setting, and “LOAD DEFAULT!” will displayed on the screen until recover finished.
DVR PLAYBACK & USB BACKUP QUICK TIME SEARCH In live viewing mode, press ► or PLAY into QUICK TIME SEARCH and press ▲ ˙ PLAY TIME SEARCH or ▼ to enter search mode. ˙ EVENT LIST SEARCH 4.1 PLAY TIME SEARCH PLAY TIME SEARCH Press ▲...
4.3 USB BACKUP Due to each USB device with different USB driver ICs, their compatibilities differ, too. This system is compatible with most of USB flash memory. If there is compatible issue, please refer to APPENDIX B. BEFORE BACKUP A. In live viewing mode, insert USB device into a USB port of the DVR. B.
DVR PLAYBACK & USB BACKUP PLAYBACK SYSTEM REQUIREMENT: CPU: Intel Pentium III 1G or above. MEMORY: 512 MB or above. VGA: 32MB/64MB or above. OS: Microsoft Windows XP SP2 or above. VGA RESOLUTION: 1024*768 or above. 5.1 MAIN SCREEN SETTING A.
NETWORK VIEWING & PLAYBACK CPU: Intel Pentium III 1G or above. Memory: 512 MB or above. VGA: 32MB/64MB or above. OS: Microsoft Windows XP SP2 or above. VGA RESOLUTION: 1024*768 or above. 6.1 IP ADDRESS SETUP ON PC SITE Install cameras inside in LAN or use cross-over interlaced network cable to connect with PC.
parameters. 6.2 OPTIONAL MICROSOFT INTERNET EXPLORER SETUP: OPTION 1: DISABLE ACTIVEX WARNING Tools Internet Options Security Custom Level Security Settings Download unsigned ActiveX controls Enable or Prompt (recommend). Tools Internet Options Security Custom Level Security Settings Initialize and script ActiveX controls not marked as safe Enable or Prompt (recommend).
Above three options are all based on select as the prompt. As indicated in the dialogue box. Please select "YES." OPTION 2: ADD TO TRUSTED SITES Tools Internet Options Security Trusted sites Sites 6.3 LOGIN A. INSTALL ACTIVEX B. START INSTALL ACTIVEX...
C. ACCOUNT & PASSWORD LOGIN After IP setup and connect to network or LAN, type IP address on IE Browser directly. The following User name & Password Login window will popup. Default user name: admin Default password: admin 6.4 LIVE VIEWING DVR CONFIGURATION SYSTEM TIME A.
6.5 CONFIGURE A. System - System Information a. SYSTEM INFORMATION SERVER NAME: This name will show on the IP Installer. LANUGAGE:There are English, Traditional Chinese, and Simplified Chinese. After selecting one language, the following dialogue box will popup and ask the user to confirm. b.
Page 35
B. SYSTEM – USER MANAGEMENT User Management provides 3 levels of limits authority: Administrator (the highest), User, and Anonymous. Default administrator account: Username: admin Password: admin a. ANONYMOUS USER LOGIN: YES: Accept anonymous user login without password as guest login. NO: Anonymous login unacceptable.
Page 36
a. IP ASSIGNMENT DHCP: In Dynamic Host Configuration Protocol (DHCP) mode, DHCP server will get setting done automatically. STATIC IP: Please input IP address, Subnet Mask, and Gateway based on network environment. D. PORT ASSIGNEMENT With IP Share (Router), the following Ports needed to be adjusted in case of conflict.
Page 37
F. PPPoE SETTING Click on Enabled to enable ADSL dial function. Username: Username for ADSL account. Password: Password for ADSL account. After dialed successfully, new IP address will appear. G. SEND MAIL AFTER DIALED Click on Enabled to enable SEND MAIL AFTER DIALED function. Subject: Mail subject.
Page 38
DDNS SETTING - DYNDNS.ORG PROVIDER: Select dyndns.org HOSTNAME: The registered hostname in DYNDNS.ORG. USERNAME: The registered username in DYNDNS.ORG. PASSWORD: The registered password in DYNDNS.ORG. SCHEDULE UPDATE: A period of time to update IP address. DDNS.CAMNNDS.COM DDNS 設定 – DDNS.CAMDDNS.COM PROVIDER: Select ddns.camddns.com USERNAME: The registered username in DDNS.CAMDDNS.COM.
Need help?
Do you have a question about the HDR-04FE and is the answer not in the manual?
Questions and answers