Troubleshooting Guide - RELM RPU4200A Owner's Manual

Fm handheld transceiver
Table of Contents

Advertisement

TROUBLE SHOOTING GUIDE
NO. PROBLEM
The radio cannot
Battery power may be insufficient.
be switched on
Recharge or replace the battery pack.
1
or no display
after
Battery pack may not be installed properly.
Remove the battery pack and install
being switch ed o n
.
again.
The battery power
The battery life is finished;
2
consumes quickly
please replace it with a new battery pack.
after charging.
Cannot talk to
Make sure the CTCSS/DCS tone is the
or hear other
same as that of your group members.
3
group members .
Out of the effective communication range.
Other voices
Change the CTCSS/DCS tone, and make
from non-group
sure to changed the tone of all radios in
4
members are
your group.
heard on the
Channel.
Communication
Make sure the antenna is well connected.
5
range is too
Make sure the antenna is the original one.
short.
Check if the battery power is in normal
s t a t e .
Ask your local dealer to adjust the squelch
level.
13
SOLUTION
i t
SETTINGS (set by the dealer)
Model: ____________
1)
Channels List
TRANSMITTING
CHANNEL
FREQUENCY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2) The way to restart scanning after its pause:
Time control
Carrier wave control
3) The way to revert the working channel:
Serial No.: ___________
RECEIVING
CTCSS/DCS
FREQUENCY
14

Advertisement

Table of Contents
loading

Table of Contents