Download Print this page

Ten-Haaft Oyster Vision II Assembly Instructions Manual page 6

Hide thumbs Also See for Oyster Vision II:

Advertisement

1. Space requirement of the external unit
Make sure that sufficient room is available for the folded-up system as
well as for the radius of action (turning radius).
Generally, the following space is required for the folded-up system:
Later on, the system must be mounted in such a way that the LNB points
to the rear of the vehicle (see drawing on previous page).
O
y
For the radius of action during the rotation of the antenna, likewise
sufficient space must be planned. That means that roof systems, e.g. air
conditioning systems, roof lights in opened state, roof suit-cases etc.,
must be located outside of the radius of action indicated above.
Oyster 85: length 111.5 cm
O
Oyster 65: length 91.5 cm
Centr
s
e
t
r
Oyster 65:
y
s
e
t
r
width 72 cm
Radius Oyster 65:
54 cm to 55 cm height
Radius Oyster 85:
65 cm to 55 cm height
6
Oyster 85:
width 92 cm
Driving direction

Advertisement

loading