Charging The Battery; Inserting/Removing The Battery - Ricoh Pentax K-S2 Start Manual

Charging the Battery

1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
Battery charger
3
Face the A mark on the
battery up, and insert it
into the battery charger.
Insert the battery into the battery
charger at an angle, and then
fit into place.
The indicator lamp is lit while
charging and turns off when
the battery is fully charged.
(Approximate maximum charging
time: 240 minutes)
22
Indicator lamp
AC plug cord

Inserting/Removing the Battery

1
Open the battery cover.
Slide the battery cover unlock
lever (1) before opening
the cover.
2
Face the A mark on the
battery towards the outside
of the camera, and insert
the battery until it locks
into place.
To remove the battery,
push the battery lock lever
in the direction of 2.
3
Close the battery cover.
1
2