Getting Your Camera Ready For Use; Attaching The Strap; Attaching A Lens - Ricoh Pentax K-S2 Start Manual

Getting Your Camera Ready for Use

Attaching the Strap

1
Pass the end of the strap
through the strap lug and
secure it on the inside
of the clasp.
2
Attach the other end in the same manner.

Attaching a Lens

1
Make sure that the camera is turned off.
2
Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3
Align the lens mount indexes
(red dots: 3) on the camera
and the lens, and secure by
turning the lens clockwise
until it clicks.
To remove the lens
Attach the lens cap, and then turn
the lens counterclockwise while
pressing the lens unlock button
(4).
u Caution
• When a retractable lens is attached and is not extended,
you cannot take pictures and use some functions. If the lens
is retracted during shooting, the camera stops working. Refer
to Step 2 of "Shooting with the Viewfinder" (p.26) for how to
use the retractable lens.
3
3
4
21