Installation Guide - Valor ITS-301D Operating Instructions Manual

Installation Guide
• Choose the mounting location carefully so that the unit will not
interfere with the normal driving functions of the driver.
• Avoid installing the unit where it would be subject to high tempera-
tures, such as from direct sunlight or hot air from the heater, or
where it would be subject to dust, dirt or excessive vibration.
• Use only the supplied mounting hardware for a safe and secure
installation.
• Be sure to remove the front panel before installing the unit.
NOTE: Inclination angle for car radio installation must not exceed
30° otherwise the front panel will not open.
NOTE: Keep the release key in the safe place as you may need it in
future to remove the unit from the car.
1. UNIT
2. RELEASE CASE
3. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X15 HEX BOLT