Listening To Cd/Mp3 - Valor ITS-301D Operating Instructions Manual

Listening to CD/MP3
Searching for particular track using GOTO
You can use the GOTO function to search for a desired track number or
particular point of atrack to play.
1. Press and hold GOTO on the remote control during playback. Time
and track number search appears.
2. Enter the minutes and seconds for the currently played track if you
want to search by time. Press Enter. \
3. Enter track number if you want to search by tracks. Press Enter.
Folder Name Track file names
Intra Playback
Press INT during playback to play the first 10 seconds of each track.
Rep.eat tracks
You can choose between repeat playback of a single track or all tracks.
1. Press RPT on the remote control during playback.
2. Every time you press this button, the unit switches to the following
settings:
Repeat 1 - Repeat the current playback track.
Repeat D1R - Repeat all the tracks under the currently played folder.
Repeat All - Repeat all folders and tracks.
Program Playback
You can set which tracks to play according to your desired sequence
using the PROG function.
1. Press and hold Prog button on the remote control.
2. Enter the track number besides the memory location.
3. When all tracks have been programmed, select PLAY and press Enter.
Program playback will start.
4. To clear all program entries, press Prog and select CLEAR.
5. To stop program playback, press Stop button twice.
- -.._ ••
~ " - ' - : I
••_II.
NOO
I 0012
5 0001
g
lID
13
2
IS 10 14
3 1
II 15
4
8
12
18
PLAY
CLEAR
SD/MMC Card Input
1. Power off head unit.
2. Press
~
button to open the front panel.
3. Insert the SD/MMC card into the card slot (26).
@"""
liI
n
Ei
4. Attach front panel back to the head unit. Turn
II ~~~~~~::
on unit, press MODE button to SD/MMC state
\l
26