Test Stop Display; How To Enter Data - Toshiba Satellite L20 Series Maintenance Manual

Test Program for Field.

3.21.4 Test Stop Display

If an error occurs during a Subtest and YES is selected for Error Stop, the following message
displays:
[HALT OPERATION]
1. Test end
2. Continue
3. Retry
* Select 1, 2, or 3
The three selections have the following functions:
1: Terminates the test program and exits to the subtest menu.
2: Continues the test from the error.
3: Restarts the test from the beginning.
Use the arrow keys to move the cursor to the desired option and press Enter.

3.21.5 How to enter data

Letters which must be entered are always shown in [ ]. Simultaneous entries are displayed
by a "+" mark. For example:
[a] [Enter]
Press the "a" key, then press the [Enter] key.
[Ctrl] + [c]
Press the [Ctrl] key and the "c" key simultaneously.
Satellite L20 Maintenance Manual(960-Q01) 143