Aiwa Z-A65 Service Manual page 36

Pin No.
Pin Name
59 P24/ECO
60 ~ 63 P23 ~ P20
64 P19/CST2
65 P18
66 P17/CAM2
67 P16/AUTO1
68 P15/AUTO2
69 P14/CAM1
70 P13/CST1
71 P12/REA
72 VDD4
73 ~ 83 P11 ~ P1
84 P39
85 O-KSCAN
86 MOTOR
87 SOL1
88 SOL2
89 VSS2
90 VDD2
91 DISH-RVS
92 DISH-FWD
93 CD3
94 CD4
95 O-CD-DATA
96 CD-XLT
97 CD-CLK
98 SR-LCK
99 I-IFC/I-CD-SUBQ
I-RDS-DATA/
100
I-CD-DRF
I/O
O/I FL segment P24 output/ECO setting switching input. H: ECO mode off.
O FL segment P23 ~ P20 output.
O/I FL segment P19 output/Deck 2 cassette detection. L: YES.
O FL segment P18 output.
O/I FL segment P17 output/Deck 2 cam SW input. L: ON.
O/I FL segment P16 output/Deck 1 auto stop input.
O/I FL segment P15 output/Deck 2 auto stop input.
O/I FL segment P14 output/Deck 1 cam SW input. L: ON.
O/I FL segment P13 output/Deck 1 cassette detection SW. L: YES.
O/I FL segment P12 output/Deck 2 side-A recordable SW. L: REC.
– Power supply.
O FL segment P11 ~ P1 output.
O FL segment P39 output.
O Keyscan output. L: IN.
O Deck motor ON/OFF control. L: ON.
O Deck 1 solenoid control. L: ON.
O Deck 2 solenoid control. L: ON.
– Connected to GND.
– Power supply.
O CD dish reverse output. H: REV(2). (Not used)
O CD dish forward output. H: FWD(2). (Not used)
O CD dish LED3. L: ON.
O CD dish LED4. L: ON.
O Serial data output to CD.
O CD DSP serial latch output.
O CD DSP serial clock output.
O Shift register IC latch clock.
I Tuner IF count data input/CD SUBQ serial data input.
RDS serial data input. (Not used)/
I
CD RF detect input.
– 36 –
Description