Sony HCD-GN700 Service Manual page 18

HCD-GN700/GX8800
• Display when an error occurred (CD Error Code Mode)
Procedure:
[AMP MENU]
1. Press button,
x
simultaneously to enter the error code display mode.
2. The fluorescent indicator tube displays the number of total error.
3. Each time button or
M
change as below
Display of total error
M + Button
Display of Mechanical errors
Button
M +
Display of no disc errors
4. To clear the error record, operate the cold reset. (Refer to the
"MC COLD RESET")
5. To release this mode, press the
power plug to turn the power OFF.
1) Display of total error
Display
EMC**EDC**
EMC**: The number of mechanical errors.
EDC**: The number of no disc errors after chucking the disc.
2) Display of mechanical errors
Display
M*$$%%&&##00
M*: The number of mechanical error ("00" is latest one)
(Press button or
> .
$$: Not used
%%: Loading related error (Second figure is not used)
D: Stop by the problem other than mechanical problem while
closing.
E: Stop by the problem other than mechanical problem while
opening.
C: Stop by the problem other than mechanical problem while
chucking up.
F: Stop by the problem other than mechanical problem while
chucking down.
&&: Emerging error
01: Stop while chucking up.
02: Stop while chucking up.
03: Time-out of EX-CHANGE open.
05: Time-out of EX-CHANGE close.
##: Not used
18
[DISC 1]
button and button
button is pressed, display
m
– m Button
Button
– m
button or disconnect the
?/1
button to display next error)
3) Display of no disc errors
Display
D*$$%%&&##00
D*: The number of mechanical error ("00" is latest one)
(Press button or
> .
$$: Error type
01: Focus error
02: GFS error
03: Setup error
%%: Not used
&&:
00: No disc judgment without chucking retry.
01: No disc judgment after chucking retry.
##: The state when judged as no disc
01: Stop
02: Setup
03: TOC reading
04: Access
05: Playback
06: Pause
07: Manual search (Play)
08: Manual search (Pause)
[CD REPEAT 5 LIMIT OFF MODE]
• The number of repeat for CD playback is 5 times when the repeat
mode is "REPEAT ALL". This mode enables CD to repeat
playback for limitless times.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select CD function.
[REPEAT]
3. Press button,
x
simultaneously to enter the CD repeat 5 limit off mode and the
fluorescent indicator tube displays "LIMIT OFF".
3. To release this mode, operate the cold reset. (Refer to the "MC
COLD RESET")
[CD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the
RAM to initial conditions. Use this mode when returning the
set to the customer after repair.
Procedure:
1. Press button to turn the set ON.
?/1
2. Select CD function.
[AMP MENU]
3. Press x button,
simultaneously. The set will power off automatically.
4. After the "STANDBY" blinking display finish, a message
"LOCK" is displayed on the fluorescent indicator tube and the
CD ship mode is set.
button to display next error)
button and [CD] button
[GAME]
button and button