Midea MFJ-24ARN1-QB8 Technical & Service Manual page 14

6.2.3 Take the Pipe Clip off before connecting the pipes and wiring; fit it when these
finished.
Use accessories 4 and 9 to connect the pipes/wires on both sides and back side.
Refrigerant Pipe
Reamer Joint
Wiring
Hole 35
φ
6.2.4 Ship the a/c to the installation place originally packed;
Be careful while hanging the unit because the center of gravity of the unit is not centralized;
Do not make the angle of inclination more than 45 degrees while shipping;(Avoid horizontal
storage)
Be sure the electric insulation work is well done if installed on metal ceiling / wall.
Fix the unit feet with bolts (M10/M8). Be sure the unit is fixed strongly enough to against blast or
earthquake.
Pipe/wire-hole positions on both sides
Drain Pipe
Reamer Joint
Pipe/wire-hole position on the bottom
Refrigerant/drain
Pipe hole
12
Installation detail
Refrigerant/drain
Wiring
Pipe hole 80
Hole 35
φ
Refrigerant/drain
Pipe hole
φ