Advertisement
Basic adjustment settings
Press
./T
to select "PCM" or "Dolby
Digital", and then press
ENTER.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the 1V. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press
MENU
to display the MENU screen,
and then press
~/~
to select "Digital
Setup".
Press
./T
to select "Audio Setup", and then
press
ENTER.
This setting allows you to optimize the settings of
Digital broadcasting.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press
~/~
to select "Enable", and then
press
ENTER.
Press
MENU
to display the MENU screen,
and then press
~/~
to select "Power
Control".
Press
MENU
to exit.
Press
~/T
to select "No Signal Off", and
then press
ENTER.
Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
• "Disable" is the factory preset value.
• When a TV program finishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Press
MENU
to displqy the MENU screen,
and then press
~/~
to select "Power
Control".
PCM
Dolby Digital
The optical output terminal outputs
audio signal in PCM form. If your
digital audio system does not support
Dolby Digital, select "PCM".
The optical output terminal outputs
audio signal in Dolby Digital form.
It reproduces sound from surround
program of digital.
Press
~/T
to select "No Operation Off", and
then press
ENTER.
Press
MENU
to exit.
Press ......
/~
to select "Enable", and then
press
ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
Press
MENU
to exit.
• "Disable" is the factory preset value.
@-29
Advertisement
