Jam Touch User Manual And Warranty Information

Where There's A Jam,
There's A Party!
www.jamaudio.com
READ UP.
JAM TOUCH LANGUAGE
SELECTOR PIN
Below you will find a Language Selector Pin
(LSP), which you can use to toggle through
featured languages on your Jam Touch.
1. Press and hold the power button for 3
seconds to power on.
2. Once the speaker is on, turn it over.
3. Place the LSP in the language pin hole and
toggle through until you reach your desired
language or tone.
Note: The language are loaded in the following
order: English, Spanish, French, Portuguese,
Tone, and then back to English.
HEY. HAVE WE SEEN YOU HERE BEFORE?
Register your speaker at www.jamaudio.com. Information about where you bought it and how
you're using it is like gold for the people who make these speakers. Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos en
www.jamaudio.com
There are lots of cool Jam speakers. Check them all out at www.jamaudio.com

PACKAGE CONTENTS

Speaker
JUST CHARGE IT
Charging the speaker is so easy you've probably figured it out by now, but just in case, you've got two
options: you can charge it using your computer or a wall outlet.
1. The cord that came with
the speaker—the one with
the USB on one end and
the Micro USB on the
other—is made to work
with your computer.
Now go get ready for an epic night while your speaker does too. It needs about 3 hours to be fully
charged for 5 hours of party time.
CONTROL YOUR DESTINY...OR AT LEAST YOUR SPEAKER
1. That's the power button, press and hold for 5
seconds to power on
2. It speaks too. Toggle between languages here
3. The power cord goes here
4. Hook it up old-school
5. Skip back a track or jam on to the next song
6. Touch it to play, touch it again to pause
7. Twist to the right to turn the music up
8. Just twist to the left to turn the music down (Wait,
why do you need to turn it down?)
9. Check out how much juice is in the battery
10. That light lets you know when Bluetooth is
connected
11. Language Selector Pin
ALLOW US TO SHED SOME LIGHT
What It Looks Like
Flashing Red
CHARGE
Solid RED (when plugged in)
OFF (when plugged in)
Quick Flash BLUE
Slow Flash BLUE
RED
™
VOICE PROMPTS
The voice prompts will walk you through your
speaker's status, telling you when it is: Ready to
pair, paired, ignoring a call, ending a call,
charging and powering off.
If you'd rather hear tones, simply use the
included Language Selector Pin to toggle to the
tone option.
Please visit
www.jamaudio.com to
explore translations in
your language.
Charging Cord
User Manual
2. If you want to use the wall outlet,
What It Means
Low Battery
Charging
Ready to Party
Pairing Mode
Connected
Line-in Mode
USER GUIDE AND WARRANTY INFORMATION
PARTY DOWN.
LANGUAGE SELECTOR PIN
Language
Selector Pin
you'll need to pick up a power
cord with a Micro USB the next
time you're at the store, or use
any USB AC adapter, including
the one for your cell.
1
8
2
3
4
11
HX-P550
5
6
5
7
9
10