Using A Pc With An Sd Memory Card Slot Or A Card Reader - Panasonic LUMIX DMC-FS42 Operating Instructions Manual

Hide thumbs Also See for LUMIX DMC-FS42:

Table of Contents

„

Disconnecting the USB connection cable safely

• Proceed with the hardware removal using "Safely Remove Hardware" on the task tray

of the PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD

monitor of the digital camera before removing the hardware.

Note

• We recommend placing a soft cloth under this unit to prevent scratching.

• Turn the camera off before connecting or disconnecting the AC adaptor (optional).

• Before inserting or removing a card, turn the camera off and disconnect the USB

connection cable. Otherwise, data may be destroyed.

• With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of

the SDHC memory card to the [LOCK] position when importing pictures from an SDHC

memory card.

„

Viewing the contents of the built-in memory or card using the PC (folder

composition)

•

Built-in

memory

•

Card

A new folder is created when pictures are taken in the following situations.

• When a card containing a folder with the same folder number has been inserted (Such

as when pictures were taken using another make of camera)

• When there is a picture with Úle number 999 inside the folder

„

Connection in the PTP mode (Windows

Select [PictBridge (PTP)] when connecting USB cable.

Data can now be read only from the card into the PC.

• When there are 1000 or more pictures on a card, the pictures may not be imported in

the PTP mode.