Installing The Projector - JVC DLA-SH4KNL Instructions Manual

Connection and Installation

Installing the Projector

and Screen (Cont'd)
When shift amount in the right direction is
+25 %
Install the projector such that the center of the lens is
aligned with the 1/4 position from the left edge of the
screen.
When shift amount in the left/right direction
is 0 %
Install the projector such that the center of the lens is
aligned with the center of the screen.
When shift amount in the left direction is –25 %
Install the projector such that the center of the lens is
aligned with the 1/4 position from the right edge of the
screen.
14
Downloaded From projector-manual.com JVC Manuals
Movable Range of Projected Image
GL-MS4015SZG Zoom lens
50 %
25 %
50 %
GL-MS4011SG Short focal length lens
15 %
5 %
15 %
NOTE:
● When using the lens shift feature, do not exceed the
range (shift amount) as shown above. If the shift
amount exceeds the range as shown, shadows will
appear on the projected image.
Lens Fixation Mechanism
A screw for securing the lens mechanism is attached in
the factory shipment to prevent damage of the
equipment during transportation. If the lens does not
move horizontally or vertically when you operate AShiftB
in the Lens menu, this could be because the screw has
not been removed. When this occurs, please consult
your authorized dealer.
Projected
Image
25 %
Movable
Range
Projected
Image
5 %
Movable
Range