Advertisement
• The set includes rubber parts in two sizes. Choose a
suitable rubber part depending on the size of the
front fork and attach it to the sensor (picture 4).
• There are two possibilities for attaching the speed
sensor: using cable ties or an o-ring. When attaching
the sensor with the cable ties, pass them through
the sensor and rubber part holes (picture 5).
• Adjust the sensor to the front fork so that the
POLAR logo faces outwards. Adjust the ties loosely.
Do not tighten them fully yet. (Picture 6.)
• Alternatively attach the sensor with an o-ring as in
picture 7. Adjust the sensor to the front fork so
that the POLAR logo faces outwards. When
attaching the sensor with an o-ring, cut off excess
rubber part ends. (Picture 7.)
• Attach the magnet to a spoke at the same level as
the sensor. The magnet hole must be facing the
speed sensor. Fasten the magnet to the spoke and
tighten it loosely with a screwdriver. Do not tighten
it fully yet. (Picture 8.)
• Fine-tune the positioning of both the magnet and
the speed sensor so that the magnet passes close
to the sensor but does not touch it. Adjust the
sensor towards the wheel/spokes as much as
possible. The maximum distance between the sensor
and the magnet should be 4 mm/0'16'' (picture 8).
• Once the magnet and the speed sensor are
positioned correctly, tighten the screw to the
magnet with a screwdriver. Also tighten the cable
ties securely and cut off any excess cable tie ends.
Your safety is important to us. While riding your
bike, please keep your eyes on the road to prevent
any accidents and injury. Check that you can turn the
handlebar normally and that the cable wires for brakes
or gearing do not catch on the bike mount or the
speed sensor. Check also that the bike mount or speed
sensor does not hamper pedaling or the use of brakes
or gearing.
Before you start cycling, you should set the wheel size
of your bicycle into the cycling computer. For further
information on how to use the Polar Speed Sensor
with the cycling computer, please refer to the user
manual of the cycling computer in question.
3
Advertisement
