Vertical Airflow - Panasonic CU-E9DKE Service Manual

This document is protected (secured) by www.nettovarmepumpar.se
8.1.9.1.

Vertical Airflow

Operation Mode
Heating
Cooling, Soft Dry and Ion
Mode Judgment in Auto
1. Automatic vertical airflow direction can be set using remote control; the vane swings up and down within the angles as stated
above. For heating mode operation, the angle of the vane depends on the indoor heat exchanger temperature as Figure 1
below. When the air conditioner is stopped using remote control, the vane will shift to close position.
2. Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated above and the positions
of the vane are as Figure 2 below. When the air conditioner is stopped using remote control, the vane will shift to close position.
8.1.9.2. Horizontal Airflow
1. Automatic horizontal airflow direction can be set using remote control; the vane swings left and right within the angles as stated
below. For heating mode operation, the angle of the vane depends on the indoor heat exchanger temperature as Figure 1
below.
Heating, with heat exchanger temperature
Cooling, Soft Dry and Ion
2. Manual horizontal airflow direction can be set using remote control; the angles of the vane are as stated below and the positions
of the vane are as Figure 2 above.
Pattern
Airflow Direction
Patterns at Remote
Control
Vane Angle (°)
Airflow Direction
Auto with Heat Exchanger
Temperature
Manual
Auto
Manual
Auto
Manual
Operation Mode
1 2
90 65
29
CS-E9DKEW CU-E9DKE / CS-E12DKEW CU-E12DKE
1
A Upward fix
B Downward fix
C Upward fix
D Downward fix
3
8
8
Vane Angle (°)
A 65 ~ 115
B 90
65 ~ 115
3 4
78 102
Vane Angle (°)
2 3 4 5
3
64
3
3
17 33 49 63
8 ~ 36
15 22 30 36
8
15 22 30 36
5
115