Bios Refreshing, Watchdog And Gpio Programming; Bios Refreshing - TDS e28 User Manual

BIOS REFRESHING, WATCHDOG AND
4
GPIO PROGRAMMING

4.1 BIOS Refreshing

The BIOS program instructions are contained within computer chips called FLASH ROMs that
are located on your system board. The chips can be electronically reprogrammed, allowing you to
update your BIOS firmware without removing and installing chips.
The E28 provides the FLASH BIOS update function for you to easily to update BIOS.
Please follow these operating steps to update BIOS:
You must boot up system into MS-DOS first and please don't detect files CONFIG.SYS
Step 1:
and AUTOEXEC.BAT.
Step 2: In the MS-DOS mode, you should execute the AWDFLASH program to update BIOS.
Step 3: Follow all messages then you could update BIOS smoothly.
26
E28 User Manual