Pnp/Pci Setup - TDS e28 User Manual

3.4 PnP/PCI Setup

Option
Reset
Configuration
Data
Resources
Controlled By
IRQ Resources
Choice
Normally, you leave this field Disabled. Select Enabled to
reset Extended System Configuration Data (ESCD) when you
Enabled
exit setup. If you have installed a new add-on and the system
Disabled
reconfiguration has caused such a serious conflict, then the
operating system can not boot.
The Award Plug and Play BIOS has the capacity to
automatically configure all of the boot and Plug and Play
compatible
Auto(ESCD)
absolutely nothing unless you are using a Plug and Play
Manual
operating system such as Windows 95. If you set this field to
"manual," then you may choose specific resources by going
into each of the submenus.
When resources are controlled manually, assign a type to
N/A each system interrupt,depending on the type of the device
that uses the interrupt.
Description
devices. However,
20
E28 User Manual
this capability means