Tip-Over Switch; Maintenance; Troubleshooting - Hunter HPG15-M Owner's Manual

TIP-OVER SWITCH

This heater is equipped with a safety tip-over switch, which is
located on the bottom of the heater. This feature cuts the main
power to the heater if it gets knocked over. If the heater does tip
over, simply stand it upright in order to resume operation.
THERMAL PROTECTION SYSTEM
This heater includes an Overheat Protection System that shuts the
unit off when the unit reaches extremely high temperatures. If this
occurs, turn the heater off and unplug it. Do not attempt to repair or
adjust any electrical or mechanical functions on this unit.

MAINTENANCE

1. Turn the Power Control to
heater before moving or cleaning.
2. Interior dust can often be removed by using a vacuum cleaner
with a crevice tool attachment.
3. To clean the enclosure, use a clean, soft and lightly damp cloth
to gently wipe off the dirt from the surface of the unit. Be sure not
to wet the Heating Element and the switches. Allow the unit to dry
completely before use.
4. Do not use cleaning liquid or other chemicals to spray on the
unit.
1. Perform the cleaning procedures described above.
2. Wipe all parts dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.
We recommend that you store the heater in its original carton.
TROUBLE SHOOTING
If your heater fails to operate:
Make sure the electrical outlet or circuit breaker is working.
Check for obstructions. If you find an obstruction, turn the
heater OFF, and UNPLUG THE UNIT. Carefully remove the
obstruction and follow the reset instructions.
The thermostat might be set too low. Turn the thermostat
knob clockwise until the heater restarts.
(off) position and unplug the
STORAGE
6
81601-01 R20140228