Parts Of The Heater; Pilot Light - Hunter HPG15-M Owner's Manual

PARTS OF THE HEATER

Parts of the heater
1. Thermostat Control

2. Pilot Light

3. Power Control
4. Safety Grille
(Figure 1)
OPERATING INSTRUCTIONS
1. Set the heater on a dry, level surface.
2. Make sure the Power Control is in
into any standard 120 V AC outlet. (Figure 2)
3. Set the Thermostat Control all the way to
(Figure 3)
4. Set the Power Control to
the room is comfortable, select
consumption and to prevent the room from becoming too warm.
(Figure 2)
5. Your heater is equipped with an oscillation feature. If you want
to obtain a wider area of heat circulation, turn the Power Control
to or . (Figure 2)
6. This heater is equipped with a thermostat function to control
the temperature output. To increase the heat output, turn the
Thermostat Control clockwise to
turn the Thermostat Control counterclockwise to
This fan heater is equipped with a Pilot Light, which glows
whenever the heater is plugged in and turned on. It will continue
to glow even if the thermostat has cycled the heating elements
off. This feature is to prevent you from being unaware that the
heater is in operation.
Symbols
Power Off
Low Heat Setting
High Heat Setting
Low Heat Setting with Oscillation
High Heat Setting with Oscillation
(Figure 2)
(off) position. Plug cord
for fast warm up of a room. Once
to reduce electrical
. To reduce the heat output,
PILOT LIGHT
(maximum).
. (Figure 3)
5
1
4
Figure 1
Figure 2
Figure 3
81601-01 R20140228
2
3