Table of Contents
Advertisement
Tap Tempo
The TR-7 Tremolo/Rotary's Foot Switch can be used as a Tap Tempo
switch for setting the tremolo effect's modulation speed time during a live
performance.
To access Tap Tempo, do the following:
1.
Press and hold the Pedal Switch for 3 seconds.The effect first will turn
on and the Indicator LED lights solid BLUE (NOTE: If the effect was
already on, it will first turn off and then back on after 3 seconds).
2.
After 3 seconds of holding the Foot Switch, the Indicator LED will begin
flashing BLUE indicating Tap Tempo mode is now active and the LED
flashes at the current modulation speed.
3.
Tap the Foot Switch at least two times to set a new modulation speed.
The last two pedal tap intervals set the modulation speed. If a tap
hasn't been initiated after 4 seconds, two taps will be required again to
12
set the tempo.
Advertisement
Table of Contents
