Table of Contents
Advertisement
input is needed, this jack must be used. Signals will still be heard
at both outputs when only the Input 1 (Mono) jack is connected.
Connecting a guitar cable to the Input 1(Mono) jack supplies bat-
tery power even though the Indicator LED may not be lit.To pro-
long battery life, disconnect all cables from the pedal when not in
use. If the optional PS200R power supply is used for power, the
input can remain connected.
7. Input 2 - Connect a second pedal's output to this jack for stereo
operation. Inputs 1 and 2 are fed through the stereo Tremolo/Rotary
effects and then to Outputs 1 and 2 and will keep true stereo sepa-
ration between channels. NOTE: When the Rotary type is selected
and the effect is on, this input is summed with Input 1 and then fed
through the Rotary effect.
8. Foot Switch Release Pins - These two pins are spring-loaded
hinges that hold the pedal in place. Push these pins in with the tip of
a 1/4" guitar cable to release the pedal from the pedal chassis expos-
4
Advertisement
Table of Contents
