Advertisement
Quick Links
TBS-AII
DB1S-AII
IB1S-A
Digital Activated, ATL™ professional monitors
Thank you for purchasing a PMC handcrafted product. Please take
a moment to read the following guidelines. These hints & tips will
guarantee the very best results.
1. Read these instructions and keep them in a safe place for
further reference.
2. Heed all electrical safety warnings, including any on the
loudspeakers themselves.
3. Do not use the loudspeaker near water or attempt to use if
wet.
4. Clean only with a dry, lint-free, cloth.
5. Do not install near any heat sources such as radiators, ovens
or other equipment that produce excessive heat.
6. High volume audio signals, however short their duration, have
the potential to cause hearing damage. Use care when
setting the system volume level to ensure playback sound
pressure levels remain within comfortable limits.
7. Ensure the unit is rated for the local voltage before
proceeding.
8. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way
or exhibits a distinct or sudden change of operation or
performance.
REMEMBER
ACTIVATE YOUR 5 YEAR
WARRANTY ON-LINE
WWW.PMC-SPEAKERS.COM AND
CLICK ON REGISTER PRODUCT
Product Support:
For product support, accessories or servicing advice,
please contact a PMC authorised dealer/distributor.
See:
www.pmc-speakers.com/distribution/distribution.php
Company Details:
PMC Limited,
43-45, Crawley Green Road,
Luton.
LU2 0AA.
United Kingdom.
Company Reg. Number: 3328009
T +44 (0)870 4441044
F +44 (0)870 4441045
E-mail: sales@promonitor.co.uk
Web: http://www.pmc-speakers.com/
© 2010 PMC. All rights reserved.
This document should not be construed as a commitment
on the part of PMC. The information it contains is subject to
change without notice. PMC assumes no responsibility for
errors that may appear within this document
GO TO
.
Advertisement
Related Manuals for PMC TBS-AII
Summary of Contents for PMC TBS-AII
- Page 1 This document should not be construed as a commitment 8. Refer all servicing to qualified service personnel. Servicing is on the part of PMC. The information it contains is subject to required when the apparatus has been damaged in any way change without notice.
-
Page 2: Our Attention To Detail
The following guidelines are suggestions for the initial location for your monitors. Fine-tuning of their positioning can start from here. Place the TBS-AII, DB1S-AII or IB1S-A so that the front face is forward or level with any the front face of any other monitor or screen. This will ensure the most convincing image to be produced. - Page 3 (www.mypowerdrive.com) For floor mounting in studio situations, Tube 104™ high-mass stands are ideal for the DB1S-AII or TBS-AII, and PMC’s Studio frame stands for the IB1S-A. These high quality stands have been specifically designed and pre-tuned to guarantee maximum performance from all the models.
- Page 4 A spin-off from the lack of distortion is that the upper bass and midrange is not masked by harmonic distortion residing in the very low frequencies. The result is PMC‟s characteristic transparent midrange and fast, attacking bass notes, all with outstanding clarity.