Table of Contents
Advertisement
End to end the current call.
Dialpad/Hide to toggle the appearance of the onscreen dialpad.
Bluetooth to route the phone's audio through a connected Bluetooth headset (On) or
through the speaker (Off).
When the call is routed to a Bluetooth headset, the current call area shows the
Bluetooth call icon (
Note: The Headset button is activated to show the current call is routed to the connected
Bluetooth headset.
To route the current call back to the phone, tap Headset to temporarily use the
phone. Tap it again to route the call back to the connected Bluetooth headset.
When Bluetooth or the Bluetooth headset is turned off, the call is routed through
either the earpiece or speaker and shows (
Mute to mute the microphone during an active call. Tap again to unmute the
microphone.
Note: If Mute is activated, the speaker mode is deactivated.
Speaker to route the phone's audio through the speaker (On) or through the earpiece
(Off).
Activate Speaker to route the phone's audio through the speaker. (You can adjust the
speaker volume using the volume buttons.)
Deactivate Speaker to use the phone's earpiece.
Warning:
Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
Touch Dialpad (
example, an extension or access code.
For example: When you call your bank's 800 number, use your dialpad to enter your
account number and PIN.
Additional Calling Options
To obtain additional options such as phone number and the duration of the call, you must
access the Call log screen.
Phone
).
) to use the onscreen dialpad to enter additional numbers, for
23
).
Advertisement
Table of Contents
