Instructions; Power On/Off; Charging - Bauhn HE314041 Instruction Manual

Instructions

1.

Charging

When fully charged the Bauhn Bluetooth Headphones will last up to 15hrs
depending on usage. To charge, simply connect your headphones to a USB outlet
on your PC or laptop.
1. Insert included Micro USB plug into Bluetooth Headphones, the charging port
is located on the bottom of right ear pad.
2. Connect the USB plug to a spare USB port on your PC or laptop.
3. The LED light will show solid green colour to indicate charging is active.
4. Light will turn off when fully charged.
Tip: When your Bluetooth Headphones are running low on battery. The LED
on the bottom of the right ear pad will slowly flash red.
2.

Power On/Off

Before first use it is recommended you charge the Bauhn Bluetooth Headphones
for at least 1 hour. See section 2 for charging instructions.
To turn on your Bauhn Bluetooth Headphones:
5. Hold down the circle button on the side of the right ear pad for 3 seconds.
6. The headset will state "power on" when you turn on the headphones.
7. The LED on the bottom of the ear pad will quickly flash blue while
powered on.
To turn off your Bauhn Bluetooth Headphones:
1. Hold down the circle button on the side of the right ear pad for 3 seconds.
2. The headset will state "power off" when you turn off the headphones.
3. The LED on the bottom of the ear pad will flash red once when powering off.
8
After Sales Support - Help Desk
Telephone: 1300 663 907
Internet: www.winplus.com.au