Pairing Via Nfc (Near Field Communication); Audio Playback; Phone Calls - Bauhn HE314041 Instruction Manual

4.

Pairing Via NFC (Near Field Communication)

The Bauhn Bluetooth Headphones also feature NFC (Near Field Communication).
This feature lets you quickly and easily pair your Bluetooth Headphones to any
NFC enabled Bluetooth device. The below instructions assume NFC is activated on
your device. Refer to the manufacturer's instructions if you are unsure how to do
this.
1. To pair your Bluetooth Headphones to an NFC enabled device, hold the
headphones against device at the bottom of the right ear pad. There is a N icon
to indicate the best position. The headphones will automatically turn on.
2. Your NFC enabled device may prompt you to confirm pairing to the Bluetooth
Headphones.
3. When the Bluetooth Headphones are successfully paired with your device the
headphones will state "your headset is connected"
5.

Audio Playback

The Bauhn Bluetooth Headphones features audio playback controls located on the
side of the right ear pad. You can control volume and track playback quickly and
easily from your Bluetooth Headphones.
1 – Volume Up
2 – Play / Pause
3 – Track Forward
4 – Volume Down
5 – Track Back
6.

Phone Calls

When connected to your Bluetooth enabled phone, you can accept incoming calls
through your Bauhn Bluetooth Headphones.
10
1
5
4
2
3
After Sales Support - Help Desk
Telephone: 1300 663 907
Internet: www.winplus.com.au