Sym Fiddle II 50 Series Service Manual page 130

SYM
MAINTENANCE INFORMATION
Precautions in Operation
Caution
Installing pad dusts may cause disorders of respiration system or cancer, therefore, never
use air hose or dry brush to clean brake parts. Use vacuum cleaner or other authorized tool
instead.
The brake caliper can be removed without removing the hydraulic system.
After the hydraulic system is removed, or the brake system is felt to be too soft, bleed the
hydraulic system.
While refilling brake fluid, care should be taken not to let the foreign material entering into
the brake system.
Do not spill brake fluid on the painted surfaces, plastic or rubber parts to avoid damage.
Check the operation of the brake system before you go.
Specifications
Item
The thickness of front brake
disk
Front brake disk eccentricity
Master cylinder inner diameter
ID of front & rear brake drums
OD of front brake disk
Thickness of front disk brake
pad
Thickness of front drum brake
pad
Thickness of rear brake pad
Torque values
Bolt for front brake arm
Bolt for rear brake arm
Brake hose bolt
Bolt for brake caliper
Air-bleed valve
Standard
3.50
0.15
25.40
130.00
130.00
¢ w
¢ w
¢ w
0.8~1.2kgf-m
0.8~1.2kgf-m
3.3~3.7kgf-m
3.1~3.5kgf-m
0.8~1.0kgf-m
13. BRAKE
Unit: mm
Limit
2.00
0.30
¢ w
131.00
¢ w
As brake ling mark
2mm or As brake ling mark
2mm or As brake ling mark
13-3