Do you have a question about the 8488 and is the answer not in the manual?
Questions and answers
Isabelle Charbonneau
March 12, 2025
ne part pas
1 comments:
Mr. Anderson
March 12, 2025
Common issues and solutions for the King Canada 8488 air compressor not working:
1. No Power - Check if the power cord (Part #53) is properly connected. - Inspect the power switch and pressure switch (Part #47) for faults. - Verify that the capacitor (Part #40) is functioning correctly.
2. Motor Does Not Run - Ensure the motor cover (Part #42) is secure. - Check the motor support (Part #45) for stability. - Inspect the armature (Part #29) and field coil (Part #31) for damage.
3. Low Pressure or No Air Output - Check the air filter (Part #4) for clogs. - Inspect the valve assembly (Part #6) and valve gasket (Part #7) for leaks. - Ensure the piston (Part #9) and piston ring set (Part #10) are in good condition.
4. Excessive Noise or Vibration - Inspect the fan (Part #38) for damage. - Check for loose screws (Parts #15, #46, #58, #60). - Ensure the rubber handle (Part #56) is properly attached.
Page 1
Service Manual / Manuel de Service 2.5 HP Air Compressor Compresseur à Air 2.5 CV Revised/Revisé 08/2008 8488...
Page 2
CONDENSATEUR COUVERCLE DU MOTEUR BOULON HEXAGONAL A TETE BRIDEE BOULON HEXAGONAL A TETE BRIDEE SUPPORT DU MOTEUR BOULON HEXAGONAL A TETE BRIDEE MONOSTAT CONNECTEUR JOINT D'ETANCHEITE ECROU DU CONNECTEUR 8488 Price/Prix Qty./Qté. $3.05 $1.55 $34.44 $11.10 $5.00 $11.44 $4.31 $22.94 $14.89...
Page 3
6284880780 COPPER WASHER 6284880790 ELBOW 6284880800 SAFETY RESET 628488MBIL BILINGUAL MANUAL 8488 Pricing subject to change without prior notice. / Prix sujet à changement sans préavis. Description Française ATTACHE-CORDON CORDON D'ALIMENTATION CONNECTEUR EN "O" CONNECTEUR EN "Y" POIGNEE EN CAOUTCHOUC...
Need help?
Do you have a question about the 8488 and is the answer not in the manual?
Questions and answers
ne part pas
Common issues and solutions for the King Canada 8488 air compressor not working:
1. No Power
- Check if the power cord (Part #53) is properly connected.
- Inspect the power switch and pressure switch (Part #47) for faults.
- Verify that the capacitor (Part #40) is functioning correctly.
2. Motor Does Not Run
- Ensure the motor cover (Part #42) is secure.
- Check the motor support (Part #45) for stability.
- Inspect the armature (Part #29) and field coil (Part #31) for damage.
3. Low Pressure or No Air Output
- Check the air filter (Part #4) for clogs.
- Inspect the valve assembly (Part #6) and valve gasket (Part #7) for leaks.
- Ensure the piston (Part #9) and piston ring set (Part #10) are in good condition.
4. Excessive Noise or Vibration
- Inspect the fan (Part #38) for damage.
- Check for loose screws (Parts #15, #46, #58, #60).
- Ensure the rubber handle (Part #56) is properly attached.
5. Leaks
- Replace faulty gaskets (Parts #5, #14).
- Check O-rings (Part #50) and connectors (Parts #49, #51, #54, #55) for tightness.
If the issue persists, further inspection of internal components may be required.
This answer is automatically generated
ne fonctionne pas