Related Manuals for King Canada 8492
Summary of Contents for King Canada 8492
-
Page 1: Instruction Manual
3 PEAK HP 8 GALLON AIR COMPRESSOR WITH DETACHABLE TANK performance performance plus plus MODEL: 8492 INSTRUCTION MANUAL COPYRIGHT © 2010 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. -
Page 2: Warranty Information
LIMITED TOOL WARRANTY King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in materials. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS RISK OF EXPLOSION OR FIRE HOW TO PREVENT IT WHAT CAN HAPPEN Always operate the compressor in a well ventilated area free of It is normal for electrical contacts within the motor and pressure combustible materials, gasoline or solvent vapors. If spraying switch to spark. - Page 4 SPECIFICATIONS & ELECTRICAL INFORMATION SPECIFICATIONS Model ......................................8492 Voltage......................................120V Peak horsepower ..................................3 HP Amperage ......................................14A RPM (no load speed) ..................................3,400 Phase ........................................1 Hertz ......................................60Hz Max Operating pressure ................................150 PSI CFM @ 40 PSI ....................................5.2 CFM @ 90 PSI ....................................4.1 Tank size ....................................2 x 4 Gallon WARNING ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN.
-
Page 5: Operation Controls
OPERATION CONTROLS CHECK VALVE (A-FIG.3). When the air compressor is operating, the check valve “opens”, allowing compressed air to enter the air tanks. When the air compressor reaches “Cut-Out” pressure, the check valve “closes”, allowing air pressure to remain inside the air tanks. Note: (A) Fig.5 is not a check valve, it is a two way connector which allows you to connect an air hose and air tool to the detachable tank. - Page 6 BREAK-IN PROCEDURES & OPERATION ASSEMBLY AND LOCATION OF THE AIR COMPRESSOR Your compressor comes almost completely assembled, the air filter must be installed and the oil cap must be replaced with the oil breather cap (A) Fig.9. Operate the air compressor in a dry, clean, cool, well ventilated area. The air compressor pump and case are designed to allow for proper cooling.
-
Page 7: Maintenance And Storage
MAINTENANCE & STORAGE MAINTENANCE the cord plug are making good contact in the outlet. Also, check for Before doing any maintenance or adjustments to your air compressor, blown fuses or open circuit breakers in the line. the following safety precautions should be taken: - Disconnect electrical power.