Projector Features; Preparations; Contents Of Package; Fastening The Lens Cover - 3M X66 Operator's Manual

Projector features

This projector has a capability to project various picture signals onto a screen.
This projector requires only a minimal amount of space for installation and can
produce a large projected image from even a short distance.
This projector boasts a variety of I/O por and low noise. These features provide
you with the broad use of this projector.

Preparations

Contents of package

Your projector should come with the items shown below. Contact immediately your
dealer if anything is missing.
NOTE • Keep the original packing materials for future reshipment. For
moving the projector, be sure to use the original packing materials. Use special
caution for the lens part.
Projector
Operator's Guide
Product Safety Guide
Quick Start Guide
Warranty and
Warranty Registration
WEEE Statement

Fastening the lens cover

To avoid losing the lens cover, please fasten the
lens cover to the projector using the enclosed strap.
1.
Fix the strap to the strap hole of the lens cover.
Thread one end of the strap through the strap hole
of the lens cover and make the loop at the end, and
let the other end of the strap through the loop. Not
have a knot in the strap at either end.
2.
Fix the strap to the strap hole of the projector.
Thread the other end of the strap through the strap hole of the projector and make
the loop there. Let the lens cover with the one end of strap though the loop.
STANDBY/ON
VIDEO COMPUTER SEARC H
ASPECT AUTO BLANK
MAGNIFY HOME PAGE UP VOLUME
END PAGE DOWN MUTE
FREEZE MY BUTTON KEYSTONE
POSITION MENU
ENTER
ESC RESET
Remote control
(with two AA batteries)
Lens cover and Strap
Lens cover is attached to
the projector.
Projector features / Preparations
Power cord
VGA cable
USB cable
Security Label
RCA
Video/Audio cable
RCA
Component cable
Soft case
3