Initial Preparations; Guidelines - Bosch EX30 Installation Instructions Manual

INITIAL PREPARATIONS

•
Determine the operating voltage at the
installation site. The camera's Voltage Regulator
Board accepts both 10.5-40VDC and 12-28VAC
input without change to internal connections.
•
Determine the optimum mounting location for
the camera. See Section 4, Camera Mounting.
•
All cameras have been tested and pre-focused
with telephoto setting as factory default prior to
shipment. If any adjustment needed, it is
advisable to check the camera's operation
before installation.

GUIDELINES

The installation of the EX30 camera is explained in
Sections 1 to 7.
It is important that these steps are followed in numerical
order.
It is also important to follow proper safety guidelines
when installing this product.
- 9 -