Camera Re-Assembly - Bosch EX30 Installation Instructions Manual

9. CAMERA RE-ASSEMBLY

Make sure all wires are properly connected, all holes
are sealed against moisture penetration, and all
mounting screws are tight.
•
Slide the lens foam over the camera lens. Make
sure the foam is snug and as close to the
faceplate viewing window as possible and the
photocell is secure with an unobstructed view.
•
Attach the window, faceplate, and the rear cover
to the camera housing. Tighten the four bolts.
•
Tighten the camera's adjustable mounting
bracket after the desired viewing angle has been
determined.
•
Power-up the camera and check its operation.
- 40 -