Table of Contents
Advertisement
HOW TO C~NGE
COLORPANELS
If you are redecorating, you can change your dishwasher's front panels
to match or blend with your new colors by flipping them over. You may
also paint a panel with a color of your own choice.
How to Changethe Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2.
Slide the door panel out.
(Careful—edges may be sharp.)
3.
Turn the door panel around and put the color you
want in front.
4.
Replace the door panel, side trim and screws.
NOTE: Do not operate
dishwasherwhile changing
panelsor when lower access
panel is removed.
How to Changethe Lower Panel:
1. Remove the bottom panel attachment screws.
"l'=~'n'ng
Top
Trim
\
~~
~
"L-
Bottom Panel Attachment Screws
2. On models without top mounting screws, remove
the entire access assembly by ro~atingthe bottom
out and lifting it up and over the retaining tabs.
3.
On models with top mounting screws, remove
tie screws.
4. Take out the top trim screws and remove the
top trim.
5. Slide the color panel(s) up and out and put the
color you want in front.
6. Replace the top trim and screws.
7. Replace the entire access assembly by reversing
the steps.
Adding 1/4"Wood Inserts
Color insert panels for both the
door and the lower panel can be
replaced by 1/4" thick wood inserts
to match your kitchen cabinets.
Get them from your nearest
cabinet or lumber dealer.
Dimensions for 1/4" wood inserts:
Door Panel: 19fi" H x
23%6"
W.
Lower Panel: 3'X# H x 23%fl W.
Color Panels
If you have redecorated and the
color panels in your dishwasher
do not blend witi your new color
scheme you may order an additional
color panel.
Specify the color panel number
when ordering:
GPF24 White/Almond
GPF26 Harves~lack
GPF27 BlacWhite
OrderingInformation
Color Panels are available for
$5.00 (shipping and handling).
Make check payable to General
Electric Co.
Order a color panel from:
Dri-View Manufacturing
4706 Allmond Ave.
Louisville,KY 40209
12
Advertisement
Table of Contents
