Removing And Reinstalling The Main Parts - Sharp CD-BP160W Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

TAPE MECHANISM SECTION
Perform steps 1, 2, 3, 4, 5, 7 and 9 of the disassembly method
to remove the tape mechanism.
How to remove the record/playback and erase
heads (Tape 2) (See Fig. 11-1)
1. Carefully remove the record/playback head and erase head
screws (A1) x 2 pcs.
How to remove the playback head (Tape 1)
(See Fig. 11-2)
1. Carefully remove the playback head screws (B1) x 2 pcs.
How to remove the pinch roller (Tape 1/2)
(See Fig. 11-3)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <A>, and remove the pinch roller (C1) x 1 pc., in the
direction of the arrow <B>
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the belt (Tape 1) (See Fig. 11-4)
1. Remove the main belt (D1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (D2) x 1 pc.
How to remove the belt (Tape 2) (See Fig. 11-4)
1. Remove the main belt (E1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (E2) x 1 pc.
How to remove the motor (See Fig. 11-5)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
TAPE2
(F1) x2
Ø 2.6 x 5mm
Figure 11-5
Erase Head
Motor
TAPE2
– 11 –
CD-BP160W/180W/1500W/1700W
TAPE2
Record/Playback
Head
(A1)x2
Ø2 x 6mm
Figure 11-1
TAPE1
Playback
Head
(B1)x2
Ø2 x 9mm
Figure 11-2
Pinch Roller
Pull
(C1)x1
Pull
<B>
Figure 11-3
Motor
FF/REW
Belt
(E2)x1
Main Belt
(E1)x1
Main Belt
(D1)x1
Figure 11-4
Pinch
Roller
Pawl
<A>
Motor
TAPE1
Main Belt
TAPE2
(D1)x1
Main Belt
(E1)x1
TAPE1
FF/REW
Belt
(D2)x1