Advertisement
FOR YOUR RECORDS
IMPORTANT: Retain original proof of purchase to establish warranty period.
Please record the following information and refer to this information when contacting the company or an
authorized service agent. This information is found on the rating/ data plate located on the inside back of
the unit.
Model #: __________________________________________
Serial #: __________________________________________
Date of Purchase: ___________________________________
Place of Purchase: __________________________________
Type of Gas:
OPERATING INSTRUCTIONS – SIDE BURNERS
1. Make sure all knobs are in the "OFF" position.
2. Turn "on" the gas at source. Caution: If you smell gas, shut off gas supply and call for service.
3. Before lighting, remove the side burner cover or any cooking utensils from the burner grate.
4. a.) For DHSB2-B, push-in, turn counterclockwise to "HI" (LARGE FLAME) position, and hold the
burner knob in. You should hear a continuous clicking sound and see sparks being provided to
the burner. (If clicking sound is weak, replace the 9V battery).
4. b.) For DHSB1D-B, push-in and turn the burner knob counterclockwise to a "HI" (LARGE FLAME)
position. Push and hold the ignition button. You should hear a continuous clicking sound and see
sparks being provided to the burner. (If clicking sound is weak, replace the AAA battery).
5. If the burner does not ignite within 5 seconds, turn the burner to "OFF" and wait for five minutes.
Repeat the above procedures or try the following manual lighting procedures
a. Hold a lit match next to the burner ports
b. Push and turn the burner knob counterclockwise to ignite the burner.
6. Adjust flame setting to "LOW" or "MEDIUM" or "HIGH", if desired.
7. Caution: Do not leave the side burner unattended while cooking.
8. To shutdown the burner, push and turn the burner knob clockwise to "OFF".
9. For complete shutdown, turn "off" the gas at source.
Battery Locations
DHSD1D-B
NG
LP
DHSB2-B
3
Advertisement
