Kidde KN-COPE-I User Manual page 23

Operating Instructions
POSTS
FIGURE 5A
FIGURE 5B
This alarm also has a battery carrier tamper resist feature,
which helps prevent the battery carrier from being opened.
This feature is effective in preventing the removal of the
battery from this device (which will render the unit inopera-
ble during the loss of AC power).
To activate the battery carrier tamper resist feature, remove
the unit from the trim plate, disconnect the AC quick con-
nector and locate the small cut-
out in the middle of the product
label on the back of the unit.
With a small screwdriver, or simi-
lar tool, slide the switch towards
the top of the label. (see Figure
6) The tamper resist feature is
now active and the battery carri-
er can not be opened until the
FIGURE 6
tamper resist feature is deactivat-
ed.
18